Feeds
질문
Unsuccessful use of anonymous function for time-varying boundary condition
I have asked previously about time varying boundary conditions. Advice offered suggested that I should recast my heat transfer ...
6개월 전 | 답변 수: 1 | 0
1
답변질문
How to implement time dependent heat generation
The code at the end of this message produces the transient temperature history for a square with constant temperature boundary c...
6개월 전 | 답변 수: 1 | 0
1
답변질문
Plot along line from. PDE solution
The code below solves a 1-D, transient heat transfer problem set up as in general PDE format. The solution is plotted in color a...
7개월 전 | 답변 수: 1 | 0
1
답변질문
Define function for transient transient boundary condition
As shown below in yellow highlight, I have a polynomial expression for a refrigerant time-varying thermal boundary condition. I ...
12개월 전 | 답변 수: 2 | 0
2
답변질문
Presumed meshing problems in heat transfer model of thin heater sandwiched between large slabs
I have a steady state heat transfer problem trying to model a thin film heater wedged between two significantly thicker slabs...
대략 1년 전 | 답변 수: 1 | 0
1
답변질문
Mesh problems for large aspect ratio object
I want to produce a thermal model for a thin film heater. The thin film is 1.11 cm wide and I have modeled it as being 1 um thic...
대략 1년 전 | 답변 수: 1 | 0
1
답변질문
How to plot temperature along a defined line within a 2D temperature field
I can obtain 2D temperature field solutions such as the steady state example below. I would like to be able to plot the temperat...
대략 1년 전 | 답변 수: 2 | 0
2
답변질문
How to see geometry edge numbers that are crowded for multilayered geometries with layers of significantly different thicknesses
I have defined a geometry for a heat transfer problem using pde modeling. The geometry is a multi-layered configuration. Code be...
대략 1년 전 | 답변 수: 1 | 0
1
답변질문
How to display temperature at location x,y in command window for 2D heat transfer
Below is code that produces the steady state temperature field in a square with consatnt temperature bounday conditions. I want ...
대략 1년 전 | 답변 수: 1 | 0
1
답변질문
How can I define the temperature in 2D domain at location x,y [rather than nodal locations] for steady state or transient solution?
I have been able to duplicate the results for the steady state and transient responses for the problem defined at https://www....
대략 1년 전 | 답변 수: 1 | 0
1
답변질문
I can't find helper function: transientBCHeatedBlock which is supposed to be in: matlab/R20XXx/examples/pde/main
Trying to run example on Matlab site that includes: model.EdgeBC(6)= ... edgeBC(Temperature=@transientBCHeatedBlock)...
대략 1년 전 | 답변 수: 1 | 0
