Feeds
질문
How to activate Reference condition "Body-Fixed" at Reference frame for Flexible Beam?
A Simscape Multibody "Flexible Rectangular Beam" was set to a simply supported beam by Revolute and Bushing joints. Two invers e...
18일 전 | 답변 수: 1 | 0
1
답변답변 있음
How to reduce compilation time for a model with around 2,000 Model Reference blocks?
Hi Rajkoti, in case of dynamic system properties you may monitor a scope and check for signal oscillations. - optimization requ...
How to reduce compilation time for a model with around 2,000 Model Reference blocks?
Hi Rajkoti, in case of dynamic system properties you may monitor a scope and check for signal oscillations. - optimization requ...
28일 전 | 0
질문
How to rotate linked multbodies along the bending line of a flexible beam?
The Simscape Multibody library provides a Rectangle Flexible Beam block, including end frames A an B. An external torque acts ...
대략 1개월 전 | 답변 수: 1 | 0
1
답변답변 있음
The following violation occurred: Velocity Violation.
Hi Cheng, in case of a position or angle mismatch (gap or compression) the Multibody Explorer sends the message: model not asse...
The following violation occurred: Velocity Violation.
Hi Cheng, in case of a position or angle mismatch (gap or compression) the Multibody Explorer sends the message: model not asse...
대략 2개월 전 | 0
| 수락됨
질문
How to create a torque balance for one flexible body in Simscape Multibody, without any reactive torque to a linked flexible body?
Target: Thermal deflection model for linked flexible beams caused by internal torques - without reactive torques or forces. In ...
대략 2개월 전 | 답변 수: 1 | 0
