Feeds
답변 있음
Building and Embedding a Reduced Order Model in National Instruments Hardware (cRIO)
Hi Umar, Yifeng, Many thanks for taking the time to answer my question. I have build some initial transfer function, surface ...
Building and Embedding a Reduced Order Model in National Instruments Hardware (cRIO)
Hi Umar, Yifeng, Many thanks for taking the time to answer my question. I have build some initial transfer function, surface ...
대략 2개월 전 | 0
질문
Building and Embedding a Reduced Order Model in National Instruments Hardware (cRIO)
Hi All, I could do with some guidance on a task required on an National Instruments (NI) LEM controller currently under build...
대략 2개월 전 | 답변 수: 3 | 0
3
답변질문
Simscape: Constraining Translational Network with Slider Crank Block
Hi, I am building a Simscape digital twin of a twin-cylinder opposed-piston engine. I am unsure if my basic block configuration...
2개월 전 | 답변 수: 0 | 0
0
답변질문
PMLSM FOC Control: Chopper Resistor and PWM Control
Hi All, Quick question. I am modelling an FOC PMLSM drive model. I need to add a chopper resistor and switch (ideal semiconduc...
5개월 전 | 답변 수: 1 | 0
1
답변질문
Resetting a Simscape Slider-Crank Angular Position Signal to a 0 Value with a Trigger Signal.
Hi All, Forgive me if this topic of signal resetting in Simscape has been ask and solved countless times before. However, I am ...
6개월 전 | 답변 수: 0 | 0
0
답변답변 있음
Simscape PMSM: WYE Connected Capacitor Bank with Resistive Load
Hi, I have modified the Simscape blocks to describe the WYE-Connected capacitor bank with resistive load. The phase waveforms a...
Simscape PMSM: WYE Connected Capacitor Bank with Resistive Load
Hi, I have modified the Simscape blocks to describe the WYE-Connected capacitor bank with resistive load. The phase waveforms a...
8개월 전 | 0
질문
Simscape PMSM: WYE Connected Capacitor Bank with Resistive Load
Hi, I am Simulating a PMSM with a WYE Connected Capacitor Bank (2mH) with Resistive Load (1 Ohms each phase). This is for power...
8개월 전 | 답변 수: 1 | 0
