photo

Mubasher


2012년부터 활동

Followers: 0   Following: 0

메시지

통계학

  • Thankful Level 3

배지 보기

Feeds

보기 기준

질문


is any synchronization required for converting bandpass modulated signal to passband modulated signal
i have written this code which up converts baseband fsk modulated signal to passband then down convert it to baseband then demo...

12년 초과 전 | 답변 수: 0 | 0

0

답변

질문


why fft of modulated signal shows peak at carrier frequency?
the fft of fsk modulated signal should show only two peaks , one for "1" and other for "0" but my result shows one peak at ...

12년 초과 전 | 답변 수: 0 | 0

0

답변

질문


What is the default carrier frequency and bit rate in fskmod, pskmod or qammod?
In old block that is dmod these things were controlled by user but in newer blocks they dont have these paremeters.

12년 초과 전 | 답변 수: 0 | 0

0

답변

질문


Why while using sound function in matlab sound has noise in it?
I have modulated and demodulated a sound file and i have bit error rate of zero. Then why output sound is distorted? clear...

12년 초과 전 | 답변 수: 1 | 0

1

답변

질문


I NEED HELP WITH THIS CODE?
Index exceeds matrix dimensions. Error in ==> wavplay at 56 y = varargin{1}; Error in ==> Untitled at 22 wavplay('Bird')...

12년 초과 전 | 답변 수: 1 | 0

1

답변

질문


I have written a code please help me in getting the output .
When i run this code i got a warninig that data cliped during write to file. Please sugggest something. clear; clc; ...

12년 초과 전 | 답변 수: 2 | 0

2

답변

질문


please check this code .. im getting error that frequency should be less than Fs/2....
clear; clc; M=2^50; freq_sep=100; nsamp=6; y=wavread('voice','native'); x=fi(y); z=bin(x); m=str...

12년 초과 전 | 답변 수: 1 | 0

1

답변

질문


fskmod
In fskmod function M is the alphabet size which must be power of 2. What does alphabet size means?

12년 초과 전 | 답변 수: 1 | 0

1

답변

질문


Can analog to digital conversion is implemented in matlab (not simulink)?
clear; clc; data_size=100; M=2; freq_sep=500; nsamp=6; fs=10000; y=wavread('voice'); partition=[-...

12년 초과 전 | 답변 수: 2 | 0

2

답변

질문


I have a matix having binary numbers [001;011;111;111] . How can i convert it to a matrix like [0 0 1 0 1 1 1 1 1 1 1 1]? I want to modulate but could not understand how to modulate the first matrix so i need to convert it into a bitstream. So please help
clear; clc; data_size=100; M=2; freq_sep=500; nsamp=6; fs=10000; n=2; y=wavread('voice'); partit...

12년 초과 전 | 답변 수: 1 | 0

1

답변

질문


How can i modulate an audio file of "WAV" format? I have used "read" command but the problem is that matrix of audio file does not contain data as binary so it cant be digitally modulated?
a

12년 초과 전 | 답변 수: 0 | 0

0

답변

질문


How to implement nise of specific bandwidth?
a

12년 초과 전 | 답변 수: 1 | 0

1

답변

질문


please help me in ploting the modulated signal.
clear; clc; data_size=10; M=2; freq_sep=250; nsamp=10; fs=500; data=randi([0 1],1,data_size); qam_mod=qam...

12년 초과 전 | 답변 수: 0 | 0

0

답변

질문


i am calculating bit error rate for bpsk modulation scheme. i get error that matrix size of transmitted and received data is not equal. how can i fix it? code is attached in body. Please anybody can help me out.
clc;clear all;close all; mat=randint(1,1000); sig1=(2*mat)-1; % mat converted to matrix of 1 and -1 ...

12년 초과 전 | 답변 수: 0 | 0

0

답변

질문


How to implement partial band noise jamming in matlab?
I am intended to implement communications schemes in the presence of jammming. So how can i implement jaming in matlab? [Merg...

12년 초과 전 | 답변 수: 1 | 0

1

답변