Feeds
문제를 풀었습니다
How long do each of the stages of the rocket take to burn?
A space rocket has 3 stages: - stage 1, s1; - stage 2, s2; - stage 3, s3. If s1 burns 3 x as long as s2 which burns ...
8일 전
문제를 풀었습니다
Triangle Numbers
Triangle numbers are the sums of successive integers. So 6 is a triangle number because 6 = 1 + 2 + 3 which can be displayed ...
8일 전
문제를 풀었습니다
Create times-tables
At one time or another, we all had to memorize boring times tables. 5 times 5 is 25. 5 times 6 is 30. 12 times 12 is way more th...
8일 전
문제를 풀었습니다
Convert from Fahrenheit to Celsius
Given an input vector F containing temperature values in Fahrenheit, return an output vector C that contains the values in Celsi...
8일 전
문제를 풀었습니다
Current through resistor
Three resistors (R2, R3, R4) are connected in parallel as shown in the figure. If this combination is connected in series with ...
8일 전
문제를 풀었습니다
Calculate Parallel Resistance
Three resistors connected in parallel have resistances R1, R 2, and R 3, respectively. Return the total resistance R total of ...
11일 전
문제를 풀었습니다
Resistance of a light bulb
The current through two identical light bulbs connected in series is C Amperes. The total voltage across both bulbs is V Volts....
11일 전
문제를 풀었습니다
Electrical Diode Current Calculation
In engineering, there is not always a single equation that describes a phenomenon accurately enough to be applied in all instanc...
11일 전
문제를 풀었습니다
An Ohm's Law Calculator
*BACKGROUND / MOTIVATION:* Many important observations in math and science can be described by short, but powerful, equations...
11일 전
문제를 풀었습니다
Velocity Conversion
Given a velocity in mph, convert it to km/h. Round the answer to the fourth decimal place.
12일 전
문제를 풀었습니다
Force and Motion 3
Two robots push on a large object in the same direction. One robot pushes with a force of F1 Newtons and the other with a force...
12일 전
문제를 풀었습니다
Force and Motion 2
Two robots are pulling on an object in opposite directions. One robot pulls with a force of F1 Newtons and the other with a forc...
12일 전
문제를 풀었습니다
Times 2 - START HERE
Try out this test problem first. Given the variable x as your input, multiply it by two and put the result in y. Examples:...
12일 전
질문
Ho do I create live connection between Simulink and Excel ?
I wanna to establish live connection between Matlab and Excel. I have made it in .m file using time scheduling feature and actxs...
대략 12년 전 | 답변 수: 0 | 0
0
답변질문
How set saturation for PID?
How can I set pid saturation output using pidstd or some another function ? (PS. I know how to set saturion in simulink)
12년 초과 전 | 답변 수: 1 | 0
1
답변질문
Why simulation results are different?
I have model in simulink, I tune my MPC in mpctoolbox, but simulation result in mpctoolbox and simulation in my simulink are dif...
12년 초과 전 | 답변 수: 0 | 0
0
답변질문
How to start simulation with a controller output 20?
I have this model , I want to start simulation with controller output 20 and plant output 30 . Any idea how can I do that? fro...
12년 초과 전 | 답변 수: 0 | 0
0
답변질문
simulation configuration - how to get output- yout?
In simulation configuration window in simulink there is xout and yout. I can get values of xout , but not yout ? How can I do th...
12년 초과 전 | 답변 수: 1 | 0
1
답변질문
How can I set initial values of parameters in Simulink?
I wanna to set measured output of a plant to 50 degree which is a nominal value written in mpctool.
거의 13년 전 | 답변 수: 1 | 0
1
답변질문
How to install add-On?
I have a student version of Matlab. According to documentation when I write supportPackageInstaller in command window there shou...
거의 13년 전 | 답변 수: 1 | 1
1
답변질문
Why tf2ss and ss(sys) gives different results?
This code gives different results. However the tfs are the same. Can anybody exxplain it why? [A1,B1,C1,D1]=tf2ss([25...
13년 초과 전 | 답변 수: 2 | 1
