![photo](/responsive_image/150/150/0/0/0/cache/matlabcentral/profiles/23941988_1631984109053_DEF.jpg)
tje_b
Followers: 0 Following: 0
Feeds
질문
Why can't Matlab save the acceleration data higher than 8.67KSPS
I used the following codes to save my acceleration data from my Teensy4.1 board connected to my Macbook comport. I find out that...
11개월 전 | 답변 수: 1 | 0
1
답변질문
what is wrong with my FFT from a Shaker with accelerometer mounted
I tried to compute the FFT of the data attached to no avail using the FFT code below. The sensor was mounted on a shaker and I a...
대략 1년 전 | 답변 수: 1 | 0
1
답변질문
accelerometer data shows nothing in FFT
I upload the data and the code but when I run it, nothing show up. the accelerometer was connected to a shaker and sampled at ...
대략 1년 전 | 답변 수: 3 | 0
3
답변질문
i tried pulling my data from arduino port but got error. I am a novice
serialPort = 'COM5'; baudrate = 115200; s = serialport(serialPort,baudrate); pause(4); numsamples = 1000; data = zero...
1년 초과 전 | 답변 수: 1 | 0
1
답변질문
FFT of vibration data in real-time
I have transmited my accelerometer data using wifi and Putty. Can I do the FFT of this data in real-time? If yes, some tips p...
대략 2년 전 | 답변 수: 1 | 0
1
답변질문
How do I plot the FFT of signal from accelerometer
The Sample rate of the accelerometer from the arduino IDE was 833Hz and I placed the accelerometer on a shaker, The shaker has a...
대략 2년 전 | 답변 수: 2 | 0