Raspberry Pi IO Control Utility

Test or Control Raspberry Pi IO pins with this Matlab GUI

Setup the Raspberry Pi to work with Matlab. Check out the Matlab Hardware Support Package documentation. This GUI based program will automatically connect to the Raspberry Pi if already configured. It shows the Pin logic values in color. The Pin headers P1 and P5 are shown exactly as on the Raspberry Pi. Additionally, it shows the actual location of the Pin Header on the Raspberry Pi. Pin direction can be set to INPUT or OUTPUT by clicking on the side buttons. Directly clicking on the Pins will change the status on the Raspberry Pi. Pin statuses are shown live.
NB: This program is updated to work with all current Raspberry Pi models. But, didn't check all models as I didn't have all boards. Suggest you to report any errors so that we can fix.