Waveform Generation with Tektronix® AWG5000 and AWG7000 Series – MATLAB® Example

버전 1.9.0.1 (2.44 KB) 작성자: Roger Yeh
MATLAB® example for arbitrary waveform generation on a Tektronix® AWG5000/7000 series generator.
다운로드 수: 4.4K
업데이트 날짜: 2016/9/1

라이선스 보기

MATLAB® is a software environment and programming language with over 1,000,000 users and supports Tektronix® Arbitrary Waveform Generators through its Instrument Control Toolbox.
One of today’s most challenging design problems in RF technologies, as well as other wireless applications, is the creation of stimulus signals that can fully exercise a prototype. Complex high-frequency modulated signals with jitter, spread spectrum clocking, and other time-variant effects require a benchtop of pulse, function, modulation and RF generators. Using MATLAB® to generate such a signal and output it through a Tektronix® Arbitrary Waveform Generator replaces the need for all that equipment.

The ‘generate_arb_waveform_Tektronix’ script connects to the Tektronix® AWG, resets it, puts the waveform onto channel 1 of the instrument by calling the ‘chirp_signal’ function, enables channel 1 output, and disconnects the instrument. This ‘generate_arb_waveform_Tektronix’ script was generated by Test & Measurement Tool, a graphical tool provided by Instrument Control Toolbox that allows the user to configure and control instruments in MATLAB®.

To execute this example, extract the files from the zip file and type ‘generate_arb_waveform_Tektronix’ in the MATLAB® command window. Notes: Change the IP address in the generate_arb_waveform_Tektronix.m file to the IP address of the AWG. If the Signal Processing Toolbox is not installed, replace the CHIRP function in chirp_signal.m with a different function.

Pre-requisites:
1. TekVISA 3.3 (or newer) – Available for download at:
http://www.tektronix.com
2. IVI Shared Components – Available for download on the IVI foundation website at: http://www.ivifoundation.org/Downloads/SharedComponents.htm
3. Tektronix® AWG5000 and AWG7000 IVI-COM instrument driver – Available for download at:
http://www2.tek.com/cmswpt/swfinder.lotr?cn=awg7000
4. MATLAB® instrument driver for the Tektronix® AWG5000 and AWG7000 Series – Created by Tektronix® and available for download on MATLAB Central at:
http://www.mathworks.com/matlabcentral/fileexchange/20153

This example was created and tested with a Tektronix® AWG7101 Arbitrary Waveform Generator but should work for other Tektronix® generators in the AWG5000 and AWG7000 series including the AWG5002, AWG5004, AWG5012, AWG5014, AWG7101, AWG7102, AWG7051, and AWG7052.

To download a Getting Started Guide for using MATLAB® with your Tektronix® instruments in 15 minutes, visit:
http://www.mathworks.com/tektronix/start

Information on using MATLAB® and Instrument Control Toolbox for configuring and controlling instruments is available at:
http://www.mathworks.com/products/instrument

For additional information on using MATLAB® with Tektronix® instruments, including MATLAB® examples, demos, drivers, and videos, visit:
http://www.mathworks.com/tektronix

인용 양식

Roger Yeh (2024). Waveform Generation with Tektronix® AWG5000 and AWG7000 Series – MATLAB® Example (https://www.mathworks.com/matlabcentral/fileexchange/22688-waveform-generation-with-tektronix-awg5000-and-awg7000-series-matlab-example), MATLAB Central File Exchange. 검색됨 .

MATLAB 릴리스 호환 정보
개발 환경: R2008b
모든 릴리스와 호환
플랫폼 호환성
Windows macOS Linux

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!
버전 게시됨 릴리스 정보
1.9.0.1

Updated license

1.9.0.0

1) added screenshot
2) added registered marks to MATLAB & Tektronix

1.5.0.0

*) updating with copyrights

1.4.0.0

*) adding BSD license

1.2.0.0

Updated description.

1.0.0.0