# How do I apply the raised cosine filter to an OQPSK signal generated by the OQPSKMOD function using the RCOSFLT function from the Communications Toolbox?

조회 수: 19 (최근 30일)
MathWorks Support Team . 2009년 6월 27일
편집: Tasos Giannoulis . 2017년 9월 29일
I want to apply a raised cosine filter to pulse-shape an OQPSK signal generated from the OQPSKMOD function. OQPSK signals generated by the OQPSKMOD function inherently up-samples the input samples by 2 to model the half symbol offset. The up-sampling is done by repeating the sample twice.
However, there is a problem when pulse-shaping the OQPSK modulated signal. For example, when I use the following code:
x = randint(100,1,4);
y = real(oqpskmod(x));
rcosflt(y,2,4,'fir/sqrt',0.3,3);
The command pads two zeroes after each y sample and generates an incorrect result.

### 채택된 답변

MathWorks Support Team 2009년 6월 27일
The OQPSKMOD function produces two samples for each symbol while the RCOSFLT function takes one sample for each symbol. To work around this issue, manually apply a half-symbol offset to the OQPSK signal. Here are the steps:
x = randint(100,1,4);
y = oqpskmod(x);
Fs = 8; Fd = 1;
halfsym = (Fs/Fd)/2;
rolloff = 0.3; delay = 3;
zI = [rcosflt(real(y(1:2:end-1)),Fd,Fs,'normal',rolloff,delay);zeros(halfsym,1)]; % append half a symbol to real part
zQ = [zeros(halfsym,1);rcosflt(imag(y(2:2:end)),Fd,Fs,'normal',0.3,3)]; % offset imaginary part by half a symbol
z = zI + 1j * zQ; % z is the pulse-shaped OQPSK modulated signal
% Plot eye diagram

댓글을 달려면 로그인하십시오.

### 추가 답변 (1개)

Tasos Giannoulis 2017년 9월 29일
편집: Tasos Giannoulis 님. 2017년 9월 29일
Indeed, this is a limitation of pre-R2017b versions of the Communications System Toolbox. However, from R2017b and on, you can use comm.OQPSKModulator and comm.OQPSKDemodulator System objects, which perform joint OQPSK modulation and filtering. Thus, upsampling is performed during the filtering operation of the modulator, not before; samples are no longer repeated.
Your code should now look like this (starting from R2017b):
x = randi([0, 3], 100, 1);
mod = comm.OQPSKModulator('PulseShape', 'Root raised cosine', 'RolloffFactor', 0.3)
y = mod(x);
plot(real(y));

댓글을 달려면 로그인하십시오.

### 카테고리

Help CenterFile Exchange에서 Modulation에 대해 자세히 알아보기

### Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!