Two-Phase Fluid Properties (2P) for Helium

조회 수: 11 (최근 30일)
Saara Väänänen
Saara Väänänen 2021년 5월 26일
댓글: Juan Sagarduy 2021년 8월 17일
Hi,
Is there a ready made library for Helium (He) two-phase fluid properties?
Could not find that from the twoPhaseFluidTables.
Br. Saara

채택된 답변

Juan Sagarduy
Juan Sagarduy 2021년 5월 26일
Hello Saara
Unfortunately not. The way to do it would be through the two phase fluid settings block (Simscape Foundation Library) and adding tabulated data.
There is a way to generate tables from REFPROP, NIST or CoolProp.
https://se.mathworks.com/help/physmod/simscape/ref/twophasefluidtables.html
Good luck Juan
  댓글 수: 4
Saara Väänänen
Saara Väänänen 2021년 8월 16일
I have a follow-up question concerning the twophasefluid table.
I have installed CoolProp and it woks fine for the fluid r134a (https://se.mathworks.com/help/physmod/simscape/ref/twophasefluidtables.html). It also returns single values for Helium.
However, when using twoPhaseFluidTables for Helium an error occurs:
HeTables = twoPhaseFluidTables([-27.2,20000],...[0.01,2.27],25,25,50,'Helium','py.CoolProp.CoolProp.PropsSI')
Error using twoPhaseFluidTables>coolpropFluidProperties (line 899)
CoolProp failed to return fluid properties at P = 0.30942 MPa, U = 9.1303 kJ/kg.
Error in twoPhaseFluidTables>@(p,u)coolpropFluidProperties(p,u,substance,coolpropFun) (line 789)
fluidProperties = @(p, u) coolpropFluidProperties(p, u, substance, coolpropFun);
Error in twoPhaseFluidTables (line 215)
= fluidProperties(p(j), u_sat_liq(j));
Error in CoolProp (line 5)
HeTables = twoPhaseFluidTables([-27.2,20000],[0.01,2.27],25,25,50,...
Caused by:
Error using CoolProp/CoolProp.__Props_err2 (line 346)
Python Error: ValueError: PropsSI failed ungracefully :: inputs
were:"L","P",3.0941899477420672e+05,"U",9.1303102201927686e+03,"Helium"; please file a ticket at
Is there something wrong in the limits / how the twoPhaseFluidTables should be used correctly?
Thanks Juan!
Juan Sagarduy
Juan Sagarduy 2021년 8월 17일
Hello Saara,
I believe we need to look into this more closely. I haven't used the two phase fluid table often. I propose that we have a Teams session to explore this and see what a solution could be.
is this adress correct to send an invitation: saara.vaananen@student.tut.fi
Regards/Juan

댓글을 달려면 로그인하십시오.

추가 답변 (0개)

카테고리

Help CenterFile Exchange에서 Two-Phase Fluid Library에 대해 자세히 알아보기

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by