Finding the time in which a specific value is reached in time-series data when peaks are found

조회 수: 58 (최근 30일)
I would like to find the time instant at which a certain value is reached in a time-series data with noise. If there are no peaks in the data, I could do the following in MATLAB.
Code posted https://in.mathworks.com/matlabcentral/answers/263429-retrieve-the-time-that-a-certain-value-is-reached-within-a-time-series#answer_205866
% create example data
d=1:100;
t=d/100;
ts = timeseries(d,t);
% define threshold
thr = 55;
data = ts.data(:);
time = ts.time(:);
ind = find(data>thr,1,'first');
time(ind) %time where data>threshold
But when there is noise, I am not sure what has to be done.
In the time-series data plotted in the above image I want to find the time instant at which the y-axis value 5 is reached. The data actually stabilizes to 5 at t>=100 s. But due to the presence of noise in the data, we see a peak that reaches 5 somewhere around 20 s . I would like to know how to detect e.g 100 seconds as the right time and not 20 s . The code posted above will only give 20 s as the answer.
The sample data plotted in the above image can be found [here](https://github.com/DeepaMahm/misc/blob/master/Untitled.txt)
Suggestions will be really helpful.

답변 (1개)

Mathieu NOE
Mathieu NOE 2021년 4월 6일
hello
I would suggest you use first a lowpass filter with long enought time constant (equivalent to moving average with buffer long enough) so that data for time below 60 s will alaways be well below the 5 value.
many "smoothing" approaches available here :
clc
close all
Fs = 1000;
samples = 1000;
dt = 1/Fs;
t = (0:samples-1)*dt;
y = square(2*pi*3*t) + 0.1*randn(size(t));
% %%%%%%%%%%%%%%%%
figure(1)
N = 10;
ys = slidingavg(y, N);
plot(t,y,t,ys);legend('Raw','Smoothed');
title(['Data samples at Fs = ' num2str(round(Fs)) ' Hz / Smoothed with slidingavg' ]);
% %%%%%%%%%%%%%%%%
figure(2)
N = 10;
ys = medfilt1(y, N,'truncate');
plot(t,y,t,ys);legend('Raw','Smoothed');
title(['Data samples at Fs = ' num2str(round(Fs)) ' Hz / Smoothed with medfilt1' ]);
grid on
%%%%%%%%%%%%%%%%
figure(3)
N = 10;
ys = sgolayfilt(y,3,51);
plot(t,y,t,ys);legend('Raw','Smoothed');
title(['Data samples at Fs = ' num2str(round(Fs)) ' Hz / Smoothed with sgolayfilt' ]);
grid on
%%%%%%%%%%%%%%%%
NN = 4;
Wn = 0.1;
[B,A] = butter(NN,Wn);
figure(4)
ys = filtfilt(B,A,y);
plot(t,y,t,ys);legend('Raw','Smoothed');
title(['Data samples at Fs = ' num2str(round(Fs)) ' Hz / Smoothed with butterworth LP' ]);
grid on
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function out = slidingavg(in, N)
% OUTPUT_ARRAY = SLIDINGAVG(INPUT_ARRAY, N)
%
% The function 'slidingavg' implements a one-dimensional filtering, applying a sliding window to a sequence. Such filtering replaces the center value in
% the window with the average value of all the points within the window. When the sliding window is exceeding the lower or upper boundaries of the input
% vector INPUT_ARRAY, the average is computed among the available points. Indicating with nx the length of the the input sequence, we note that for values
% of N larger or equal to 2*(nx - 1), each value of the output data array are identical and equal to mean(in).
%
% * The input argument INPUT_ARRAY is the numerical data array to be processed.
% * The input argument N is the number of neighboring data points to average over for each point of IN.
%
% * The output argument OUTPUT_ARRAY is the output data array.
%
% © 2002 - Michele Giugliano, PhD and Maura Arsiero
% (Bern, Friday July 5th, 2002 - 21:10)
% (http://www.giugliano.info) (bug-reports to michele@giugliano.info)
%
% Two simple examples with second- and third-order filters are
% slidingavg([4 3 5 2 8 9 1],2)
% ans =
% 3.5000 4.0000 3.3333 5.0000 6.3333 6.0000 5.0000
%
% slidingavg([4 3 5 2 8 9 1],3)
% ans =
% 3.5000 4.0000 3.3333 5.0000 6.3333 6.0000 5.0000
%
if (isempty(in)) | (N<=0) % If the input array is empty or N is non-positive,
disp(sprintf('SlidingAvg: (Error) empty input data or N null.')); % an error is reported to the standard output and the
return; % execution of the routine is stopped.
end % if
if (N==1) % If the number of neighbouring points over which the sliding
out = in; % average will be performed is '1', then no average actually occur and
return; % OUTPUT_ARRAY will be the copy of INPUT_ARRAY and the execution of the routine
end % if % is stopped.
nx = length(in); % The length of the input data structure is acquired to later evaluate the 'mean' over the appropriate boundaries.
if (N>=(2*(nx-1))) % If the number of neighbouring points over which the sliding
out = mean(in)*ones(size(in)); % average will be performed is large enough, then the average actually covers all the points
return; % of INPUT_ARRAY, for each index of OUTPUT_ARRAY and some CPU time can be gained by such an approach.
end % if % The execution of the routine is stopped.
out = zeros(size(in)); % In all the other situations, the initialization of the output data structure is performed.
if rem(N,2)~=1 % When N is even, then we proceed in taking the half of it:
m = N/2; % m = N / 2.
else % Otherwise (N >= 3, N odd), N-1 is even ( N-1 >= 2) and we proceed taking the half of it:
m = (N-1)/2; % m = (N-1) / 2.
end % if
for i=1:nx, % For each element (i-th) contained in the input numerical array, a check must be performed:
if ((i-m) < 1) & ((i+m) <= nx) % If not enough points are available on the left of the i-th element..
out(i) = mean(in(1:i+m)); % then we proceed to evaluate the mean from the first element to the (i + m)-th.
elseif ((i-m) >= 1) & ((i+m) <= nx) % If enough points are available on the left and on the right of the i-th element..
out(i) = mean(in(i-m:i+m)); % then we proceed to evaluate the mean on 2*m elements centered on the i-th position.
elseif ((i-m) >= 1) & ((i+m) > nx) % If not enough points are available on the rigth of the i-th element..
out(i) = mean(in(i-m:nx)); % then we proceed to evaluate the mean from the element (i - m)-th to the last one.
elseif ((i-m) < 1) & ((i+m) > nx) % If not enough points are available on the left and on the rigth of the i-th element..
out(i) = mean(in(1:nx)); % then we proceed to evaluate the mean from the first element to the last.
end % if
end % for i
end

카테고리

Help CenterFile Exchange에서 Logical에 대해 자세히 알아보기

태그

제품


릴리스

R2019b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by