Unpacking structured Data with multiple Fields

조회 수: 19 (최근 30일)
Andy Wileman
Andy Wileman 2021년 3월 13일
댓글: Andy Wileman 2021년 3월 16일
Hi,
I was wondering if anyone has any experience of extracting data variables from mulitple structures?
What I would like to do is extract the data contained in .measurement.transient.timeDomain for each structure, see pic below The data is contained as structures with 110 fields. I can do this for one of the Field lines at a time, but is there a way to extract all the data in one go? The picture below show the structure and the bottom pic shows the data in a single 1x1 timeDomain structure.
Kind regards,
Andy
  댓글 수: 2
Walter Roberson
Walter Roberson 2021년 3월 13일
? Your image implies 5 fields for each time domain structure, with time domain being part of a struct array. Is it possible that it is the structure array that has 110 elements, each of which is a struct with 5 fields.
Andy Wileman
Andy Wileman 2021년 3월 14일
Hi Walter,
Thanks for getting back to me. Yes that sounds correct, there are 110 elements(or rows). I click on the initial structure 'measurement' which brings up all the measurements, then click on measurement.transient. This contains that data I require (timeDomian).
What I was aiming to do is generate 110 data files. These will have the "date information" from each row as their file name, and the data contained in the measurement.transient.timeDomain structure for that row. This seems to be the required formart for importing into the Predictive Maintenance Toolbox (apparently, it can read the date/time from the file name header).
I'm afraid where I understand the basics of Matlab, structures scare me to death. I was just wondering if its possible to automate the process as I have similar data from other devices.
and is set number 8. IGBT Accelerated Aging Data Set
IGBTAgingData_04022009.zip\IGBTAgingData_04022009\Data\Thermal Overstress Aging with Square Signal at gate and SMU data\Aging Data
Kind regards,
Andy

댓글을 달려면 로그인하십시오.

채택된 답변

Aghamarsh Varanasi
Aghamarsh Varanasi 2021년 3월 16일
Hi Andy,
If you want to create a variable to store the data contained in 'measurement.transient.timeDomain', you can use the following syntax. This will save all the structures in a cellarray.
data = {measurement.transient.timeDomain}.';
Hope this helps
  댓글 수: 2
Andy Wileman
Andy Wileman 2021년 3월 16일
Thanks Aghamarsh, I'll give this ago.
Andy Wileman
Andy Wileman 2021년 3월 16일
Hi Aghamarsh,
I've got this far. I'm still having problems saving the time and date information contained in dateName as a filename, I've tried to use a conversion via datenum, so it doesn't contain any symbols that aren't allowed. Also, the timeDom is still in the form of a structure not a double. I wondered if you may have any ideas?
Kind regards,
Andy
load('Device2_13032021.mat');
L = length(measurement.transient);
for i = 1:L
dateName = {measurement.transient(i).date};
timeDom = {measurement.transient(i).timeDomain};
% TODO: Save files
%t = datenum(dateName,'dd/mm/yyyy,HH:MM:SS');
save(['Data' num2str(i) 't'],'timeDom')
end

댓글을 달려면 로그인하십시오.

추가 답변 (0개)

카테고리

Help CenterFile Exchange에서 Get Started with MATLAB에 대해 자세히 알아보기

태그

제품


릴리스

R2020a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by