Unable to perform assignment because the left and right sides have a different number of elements. Error in Esram2 (line 61) g(a+1) = g(a) - (N / D) - T; >>

Question

Joanan Destin 2020년 11월 7일

0
링크

이 질문에 대한 바로 가기 링크

https://kr.mathworks.com/matlabcentral/answers/639795-unable-to-perform-assignment-because-the-left-and-right-sides-have-a-different-number-of-elements

댓글: Joanan Destin 2020년 11월 14일

clc
close all  
clear 
% Data provided 
load('SD_Test_Data_01.mat', 'voltage')
load('SD_Test_Data_01.mat', 'current')
I = current;
V = voltage;
P = I.*V; % To find the P-V curve 
Pmaxcurve = max(P);
% Graphs
figure(1);
plot (V, I,'b:')
xlabel('Voltage (V)'), ylabel('Current (A)')
title('I-V Curve')
figure(2);
plot(V, P,'r--');
xlabel('Voltage(V)'), ylabel('Power (W)')
title('P-V Curve')
figure(3);
plot (V, I,'--')
title('Combine Plots')
hold on
plot(V, P, 'r:'); 
hold off
%At the standard test conditions (STC)
[Pmax, index_of_Pmax] = max(P);
Imp = I(index_of_Pmax); %(A) 
Vmp = V(index_of_Pmax); %(v)
%We know that
Isc = max(I); %(A)
Voc = max(V); %(V)
q = 1.6022e-19; %q is the electron charge
k = 1.3806e-23; % k is the Boltzmann constant in (J/k)
% if the solar cells inside a solar module reach 65?C
T = 25; % T the module temperature in celcius
 
% Initializing Rs the series resistance and the shunt resistance Rsh and n
Rsh = (Vmp/(Isc- Imp))- ((Voc-Vmp)/Imp);
Rs = 0;
n= 1.2;
% Taking an assumption that Rsh>>Vo
I0 = Isc/(exp(1).*(q*(Voc/(n*k*T)))-1);
Nmax = 1000; %maximum number of interations
g(1) = 0.5; %first approximation
g = zeros(1, Nmax);
for a = 1:Nmax-1
        diff_I = [0; diff(I, 1)];% zero padding to make dimensions match
        N = Isc-I0.*(exp(1).*(q*((Vmp+(Imp*Rs))/n))-1) - ((Vmp+(Imp*Rs))/(n*k*T));
        D = -I0.*(q/(n*k*T))*(1 + diff_I*Rs)*exp(1).*(q*(V+(I*Rs)/(n*k*T)));
        T = (1/Rsh).*(1 + diff_I*Rs);
        g(a+1) = g(a) - (N / D) - T;
end
plot(g, 'r.')
figure(4);