필터 지우기
필터 지우기

help me solve this question, please

조회 수: 5 (최근 30일)
wang
wang 2012년 12월 28일
편집: Walter Roberson 2024년 1월 23일
description:
The following two blocks cannot be connected in series:
Block 1: 'Controlled Current Source'
Block 2: '10 Ohms '
The first block, modeled as a current source, cannot be connected in series with the inductive element of the second block.
Add a high-value resistance in parallel with one of the two block.
You can also specify high-value resistive snubbers if the blocks have a snubber device.
i added a resistance in parallel with one of my block. questions following:
  1. i dont know how to choose the value of resistance avoiding effects on simulation results;
  2. adding a resistance may cause Algorithm divergence.
thanks
  댓글 수: 3
shafiul alam
shafiul alam 2016년 9월 21일
i have the same problem
Aadarsh
Aadarsh 2023년 8월 1일
Three phase AC voltage-
Phase to phase rms- 11 kV
Frequency-50 Hz
Phase Angle-0°
Transmission line 3 phase pi model- Length-10 km
Load-
Active Power- 8 MW
Reactive Power- 6MW

댓글을 달려면 로그인하십시오.

답변 (1개)

Sabin
Sabin 2024년 1월 23일

카테고리

Help CenterFile Exchange에서 Switches and Breakers에 대해 자세히 알아보기

제품

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by