How to create a custom damper component on Simscape
조회 수: 3 (최근 30일)
이전 댓글 표시
I am trying to create a custom damper for a Quarter of Vehicle Simscape model on Simulink. I am currently using a Force Source and connecting my force signal by means of a Simulink to PS converter. The problem is that I need the deflection velocity calculated by the same model in order to produce a certain damping force. Hence, I run into a Algebraic Loop issue, which I have not been able to resolve.
I would like to create a custom damper if possible, which I could just connect in place of a regular damper on Simscape.
Thank you for the help!!
댓글 수: 0
채택된 답변
Arnaud Miege
2011년 4월 17일
I assume you have something like this:
Going in and out of Simulink causes the algebraic loop. Instead try using the PS Look-up Table (1D) as in:
Using physical signals and staying within the Simscape network will avoid algebraic loop and should get rid of your problem. Make sure to use data in m/s and N for the PS Look-up table.
HTH,
Arnaud
댓글 수: 2
Arnaud Miege
2011년 4월 18일
Not really. You can use the Simscape language to create a custom component, but you'll still be relying on physical look-up tables. If you can upload a copy of your model on a filesharing site, I can maybe be more specific.
추가 답변 (0개)
참고 항목
카테고리
Help Center 및 File Exchange에서 Composite Components에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!