factor directional antenna array
조회 수: 1 (최근 30일)
이전 댓글 표시
Hello! How does the use of Phased Array System Toolbox to calculate the ratio of the simulated directional antenna array?
댓글 수: 2
채택된 답변
Honglei Chen
2012년 10월 18일
편집: Honglei Chen
2012년 10월 22일
Hi Pomisov,
There are two ways you can see the directivity information.
The first one is to plot the radiation pattern. For example
fc = 3e8; c = 3e8;
h = phased.ULA(4,0.5);
plotResponse(h,fc,c,'format','polar')
You can also use ArrayGain. It is the SNR gain achieved by the array compared to a single element. It is not exactly the directivity but it is related to that.
fc = 3e8; c = 3e8;
h = phased.ULA(4,0.5);
hag = phased.ArrayGain('SensorArray',h,'PropagationSpeed',c);
% calculate array gain at boresight in dB
g = step(hag,fc,[0;0])
HTH,
추가 답변 (1개)
Pomisov Andrey
2012년 10월 21일
댓글 수: 1
Honglei Chen
2012년 10월 22일
Does the code above using ArrayGain works for you? If not, could you give me a simplified example? Thanks.
참고 항목
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!