Why do I receive the message "No matching files were found" in HDL Workflow Advisor Step 4.2 "Build FPGA Bitstream"?
조회 수: 3 (최근 30일)
이전 댓글 표시
MathWorks Support Team
2019년 6월 21일
편집: MathWorks Support Team
2019년 6월 24일
Using HDL Workflow Advisor to generate an IP Core for my target, why do I receive the message
Failed No matching files were found
in Step 4.2 "Build FPGA Bitstream"?
채택된 답변
MathWorks Support Team
2019년 6월 24일
편집: MathWorks Support Team
2019년 6월 24일
This is a generic error message. Most likely, something went wrong during the build in the synthesis tool (e.g. Xilinx Vivado, Intel Quartus). For example, there might be a licensing error with the synthesis tool, or a critical error occurred during the synthesis or implementation.
To find out more about the underlying issue, check the Vivado/Quartus build logs for errors.
The build logs can be accessed by one of the following methods:
1) Open the project files in the respective synthesis tool IDE and check for error messages. For Vivado, the project files can be found at:
hdl_prj/vivado_ip_prj/vivado_prj.xpr
2) In case you did not select "Run build process externally", the build log can be found at:
hdl_prj/hdlsrc/workflow_task_RunSynthesis.log
댓글 수: 0
추가 답변 (0개)
참고 항목
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!