필터 지우기
필터 지우기

Flow rate control

조회 수: 2 (최근 30일)
Tomas Iesmantas
Tomas Iesmantas 2011년 3월 28일
Hi, I'm modelling hydraulic system with end-user: fixed displacement pump provides fluid flow in system, fluid undergos several pressure drops in resistance blocks. And at the end of system there is some kind of end user where fluid is consumed. I have time series of flow rates that end-user requires for its purposes. As end-user I have varying area orifice with connection to the atmosphere (hydraulic reference). But flow rate throught the orifice is dependent on area size (which can be controled with some signal block) and pressure difference across orifice. But to obtain needed flow rate throught the orifice I need to have a loop - to estimate orifice size, pressure at the orifice inlet has to be used. Maybe somebody knows how to generate needed flow rate without using loop (since I don't know how to solve errors occuring because of looping)?
Thanks in advance.
Tomas

채택된 답변

Arnaud Miege
Arnaud Miege 2011년 3월 28일
If you use Simscape physical signals, then that should get rid of the algebraic loop. You could also use a Hydraulic Flow Rate Source instead of a variable orifice to get the desired flow rate at the end-user, but make sure to get the sign right.
HTH,
Arnaud
  댓글 수: 1
Tomas Iesmantas
Tomas Iesmantas 2011년 3월 28일
Thanks it works just fine!!!

댓글을 달려면 로그인하십시오.

추가 답변 (0개)

카테고리

Help CenterFile Exchange에서 Upgrading Hydraulic Models to Use Isothermal Liquid Blocks에 대해 자세히 알아보기

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by