How to run a model on a speedgoat baseline, without beeing connected to the hardware via ethernet (autostart of the model when real time target is powered on)
조회 수: 8 (최근 30일)
이전 댓글 표시
Hello, We just bought a speedgoat baseline in my company. Regarding the documentation/examples, I was able to create a simulink model with scopes on target and file data acquisition also on target. To start the simulation on target I use the simulink real time explorer, and I need to press the play button on the application once it has been built. Now I would like to run the simulation without host connected to the target. I think I need to change the boot mode, but I'm not sure.
- Is the boot mode stand alone the correct way to do it (copying the 4 generated files on the target c:\)
- Or maybe using a USB key with the model (I tried removable disk mode, but I'm unable to create a boot disk - it says no removable devices found, with the usb key connected to any of the 3 usb ports on the hardware and usb support is checked in the target settings)
댓글 수: 0
채택된 답변
Diego Kuratli
2018년 6월 11일
편집: Walter Roberson
2018년 6월 12일
Hi Olivier,
For using Standalone mode with Speedgoat target machines, please follow the instructions from the Speedgoat documentation; https://www.speedgoat.com/help/page/configuration/refentry_target_setup#refsect1_standalone_mode
It is important that you do not copy the 4 generated files to the target main drive.
Thanks, Diego
댓글 수: 0
추가 답변 (1개)
참고 항목
카테고리
Help Center 및 File Exchange에서 Target Computer Setup에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!