How to short the stator to the grid side for " power_wind_dfig_det " ?

I have tried to add a breaker between the stator and B_grid_Conv in the DFIG wind turbine but it has some error. How can i fixed it?

"" Size mismatch in the initial state for model 'power_wind_dfig_det'. The signals(6).values field in the initial state structure has 38 element(s), where as the corresponding state 'DSTATE' in block 'power_wind_dfig_det/powergui/EquivalentModel1/State-Space' has 39 element(s) ""

[sekhar pisini]

Size mismatch in the initial state for model 'power_wind_dfig_det'. The signals(6).values field in the initial state structure has 38 element(s), where as the corresponding state 'DSTATE' in block 'power_wind_dfig_det/powergui/EquivalentModel1/State-Space' has 155 element(s)

i got the same error while i was trying to connect HVDC system to this wind power.

Answer 1

[Henok Ayele Behabtu]

i phase the same problem but it works when i add zero (0) value on the xInitial signal number, under the values row corrosponding to the DSTATE values