Circle in a matrix
조회 수: 105 (최근 30일)
이전 댓글 표시
Hello,
I want to make a matrix that has a weight of 1 inside a circle and 0 outside the circle. Along the edges in portions that are not fully inside the circle, I want it to have a partial weight based on how inside the circle it is. I have been able to successfully make a crude circle that only has 1 if it is fully in the circle and 0 otherwise, but I am not sure how to do the rest of the circle.
This is how I did it:
ref1 = (double((I-r).^2+(J-r).^2<=r^2));
Any hints would be extremely appreciated!
Thanks, Melissa
댓글 수: 0
채택된 답변
David Goodmanson
2017년 6월 27일
Hi Melissa,
Here is a fairly simple method that makes a softer edge by adding up contributions from the point itself and its eight nearest neighbors. It's a weighted average of the 1's and 0's you get according to whether each of those nine points are inside or outside of the circle. You can experiment around with the weights. The array of grid points has to be large enough in extent so that the edge of the circle does not touch the boundary. That's because you have to have room to shift the grid indices by +- 1.
I used a different but similar method to yours to find whether the points were inside or outside.
x = -110:110;
y = -110:110;
[xx yy] = meshgrid(x,y);
u = zeros(size(xx));
u((xx.^2+yy.^2)<100^2)=1; % radius 100, center at the origin
% hard boundary
figure(1)
imagesc(u)
% weight the points: point itself; average of nearest neighbors;
% averaged of diagonal neighbors. These must add up to 1.
wp = .4; wn = .4; wd = .2;
ind = 2:length(x)-1;
u(ind,ind) = wp*u(ind,ind) ...
+ (wn/4)*(u(ind-1,ind ) + u(ind+1,ind ) + u(ind ,ind-1) + u(ind ,ind+1) ) ...
+ (wd/4)*(u(ind-1,ind-1) + u(ind-1,ind+1) + u(ind+1,ind-1) + u(ind+1,ind+1) );
% extended boundary
fig(2)
imagesc(u)
댓글 수: 0
추가 답변 (3개)
Andrei Bobrov
2017년 6월 27일
M = zeros(1001);
M(500,500) = 1;
R = bwdist(M);
T = R >= 300;
imagesc(T)
댓글 수: 0
Image Analyst
2017년 6월 27일
편집: Image Analyst
2017년 6월 27일
Then call bwdist() to get an image where the value in the disk is it's distance from the edge towards the center of the circle.
% Get Euclidean Distance Transform
distanceImage = bwdist(~circlePixels);
% Normalize it so that it's 1 in the center.
distanceImage = distanceImage / max(distanceImage(:));
Below is a full demo. The value of the circle goes from 0 at the edge to 1.0 at the very center.
clc; % Clear the command window.
close all; % Close all figures (except those of imtool.)
clear; % Erase all existing variables.
workspace; % Make sure the workspace panel is showing.
format long g;
format compact;
fontSize = 20;
% Create a logical image of a circle with specified
% diameter, center, and image size.
% First create the image.
imageSizeX = 640;
imageSizeY = 480;
[columnsInImage rowsInImage] = meshgrid(1:imageSizeX, 1:imageSizeY);
% Next create the circle in the image.
centerX = 320;
centerY = 240;
radius = 200;
circlePixels = (rowsInImage - centerY).^2 ...
+ (columnsInImage - centerX).^2 <= radius.^2;
% circlePixels is a 2D "logical" array.
% Now, display it.
subplot(2, 1, 1);
imshow(circlePixels) ;
colormap([0 0 0; 1 1 1]);
title('Binary image of a circle', 'FontSize', fontSize);
% Get Euclidean Distance Transform
distanceImage = bwdist(~circlePixels);
% Normalize it so that it's 1 in the center.
distanceImage = distanceImage / max(distanceImage(:));
% Display it.
subplot(2, 1, 2);
imshow(distanceImage, []) ;
title('Euclidean Distance Transform', 'FontSize', fontSize);
hp = impixelinfo(); % Let user mouse around and see values.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/177219/image.png)
KSSV
2017년 6월 27일
편집: KSSV
2017년 6월 27일
Method 1
%%Make circle
th = linspace(0,2*pi) ;
R = 1. ; % Radius of circle
C = [0 0] ; % Center of circle
xc = C(1)+R*cos(th) ; yc = C(2)+R*sin(th) ;
%%Make mesh
N = 100 ;
x = C(1)+linspace(-R,R,N) ;
y = C(2)+linspace(-R,R,N) ;
[X,Y] = meshgrid(x,y) ;
Z = (X.^2+Y.^2) ;
%%Get points lying inside circle
[in,on] = inpolygon(X(:),Y(:),xc,yc) ;
%%Plot
figure
hold on
plot(X,Y,'r') ;
plot(X',Y','r') ;
%
plot(X(in),Y(in),'.b')
%%Make my matrix
iwant = zeros(size(Z)) ;
iwant(in) = 1 ;
iwant(on) = 1 ;
figure
surf(iwant)
view(2)
shading interp
Method 2
%%Make circle
th = linspace(0,2*pi) ;
R = 1. ; % Radius of circle
C = [0 0] ; % Center of circle
xc = C(1)+R*cos(th) ; yc = C(2)+R*sin(th) ;
%%Make mesh
N = 100 ;
x = C(1)+linspace(-R,R,N) ;
y = C(2)+linspace(-R,R,N) ;
[X,Y] = meshgrid(x,y) ;
Z = (X.^2+Y.^2) ;
%%Make matrix
iwant = zeros(size(Z)) ;
iwant(Z<=R) = 1 ;
댓글 수: 2
Image Analyst
2017년 6월 27일
Melissa, did you see my answer? The function bwdist() in the Image Processing Toolbox, will give you "how inside the circle it is".
참고 항목
카테고리
Help Center 및 File Exchange에서 Image Data Workflows에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!