![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/176409/image.png)
Relationship Between Simulink and FPGA Clock
조회 수: 2 (최근 30일)
이전 댓글 표시
I am designing my model in Simulink and then download it to the FPGA using the HDL coder. My output has a Fs of 11.28 Mhz and my FPGA is running with a input clock of 22.56 MHz. So how does simulink make sure that my output from FPGA is also coming out at 11.28 MHz. Is it done by the clock bundles(clock enable, master clock and clock reset) signals that simulink adds to each block? Or do i need to do something else to make sure that my output signal at FPGA pin has a Fs of 11.28 MHz?
댓글 수: 0
채택된 답변
David Amor
2017년 5월 23일
편집: David Amor
2017년 5월 23일
In the "Model Configuration Parameters" (the cog at the top) Set your solver to "Fixed-step" and "Discrete (no continuous states)" then choose the "Step Size" under additional options and type "1 / 22.56e6" (your sys clock).
Then your simulations will run at your system clock and you can confirm timings.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/176409/image.png)
댓글 수: 2
David Amor
2017년 7월 21일
Stop time doesn't matter for fixed step size. The step size is not changed with the stop time.
추가 답변 (1개)
Bharath Venkataraman
2017년 5월 23일
HDL Coder generates as many clocks or clock enables as there are rates. So if you had a single rate model, you would have a single clock port which you could hook up to the 22.56 MHz clock. You can have a valid signal that toggles valid to give an effective rate of 11.28MHz.
If you truly want two raes, you will need to use either the rate transition or downsample block to model the functionality of how you are taking in data at 22.56MHz and sending out data at 11.28MHz. HDL Coder offers you an option to use a single clock with clock enables to represent the rates or two distinct clocks. Please look at this link to get further information.
댓글 수: 2
Michael Du
2020년 1월 30일
Which link are you mentioning regarding to generate two clocks in one simulink IP block?
참고 항목
카테고리
Help Center 및 File Exchange에서 HDL Code Generation에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!