- IP address parameter to 192.168.20.2, 192.168.10.3
- Channel mapping to [1 2]
Error in channel mapping using n210 in matlab r2016b for MIMO
조회 수: 1 (최근 30일)
이전 댓글 표시
Hi I have a problem with channel mapping for MIMO using 4 USRP n210 devices, 2-RX and 2-TX and Matlab r2016b.
The ip values in RX and TX devices are: 192.168.10.2 and 192.168.10.3 in same cases.
I tried put in the channel mapping box next values: [1 2] [1 2 3 4] ['192.168.10.2' '192.168.10.3']
And have the same error, please I need help.
댓글 수: 0
답변 (1개)
Khyati Rao
2020년 8월 27일
편집: Khyati Rao
2020년 8월 27일
For USRP N210 radio, when IP address parameter has more than one IP address assigned, the Channel mapping parameter must be a 1-by-N row vector.
So, for two N210 radios (Rx mode) used in MIMO, set the following on SDRuReceiver block.
Channel mapping value 1 of the bundled radio refer to channel 1 of the radio with IP address 192.168.20.2. Channel mapping value 2 of the bundled radio refer to channel 1 of the radio with IP address 192.168.10.3.
Following links might be useful:
댓글 수: 0
참고 항목
카테고리
Help Center 및 File Exchange에서 Communications Toolbox에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!