PI control techniques for speed control of a BLDC motor
조회 수: 7 (최근 30일)
이전 댓글 표시
Hey guys, I am presently trying to tune a PI controller to control my BLDC motor, i have tried good gain method, ziegler nichles (excuse spelling) tuning for desired parameters i.e. for max overshoot and settling time by equating coefficients. I am still not satisfied with the results.
Reasons:
1. the settling voltage is above the rated value for the motor. 2. the initial start voltage value is very high since the error is maximum at start up, based on the Kp value the starting voltage will also be high. This is not good practically.
So. Are there any other methods i can use that is preffered for tuning a PI controller for motor control??.
댓글 수: 0
답변 (2개)
Raju Rambha
2018년 12월 23일
Auto tuning of PID is available in matlab. According to your requirements you con model your voltage level. you have to use non linear tuning for this.
댓글 수: 0
커뮤니티
더 많은 답변 보기: Power Electronics Community
참고 항목
카테고리
Help Center 및 File Exchange에서 Electromechanical에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!