suported hardware card to work with Simulink

Hello my name is Daniel Weinfeld - Lab Engineer of Flight Control Lab in Faculty of Aerospace Engineering we have in the Technion IIT for academic purposes a floating point(?) simulink based system to control electrical - mechanical system (inverted pendulum) the present system is based on DSpace old card DS1104 with Simulink (the system gets 2 Shaft Encoder input, produce an analog signal to control motor and using the real-time signal monitoring in the DSpace card. the control system designed in Simulink, compiled and loaded to the HW cards DSPACE) we are looking for other HW cards options with better capabilites that compatability to floating point Simulink can you send me a list and some additional technical information about tested cards that working with Simulink regards Daniel Weinfeld

capabilities do you require the card to have:

1. Item one: at least 2 Shat Encoder channel
2. Item two: at least 1 sample/sec processing rate
3. Item three: at least 1 analog output min output voltage swing +/- 2V
4. Item four: can calculate at least 6th degree system
5. Item five: can monitor real time signals in the loop and show them

, and what are the "would like but not mandatory" features

[Walter Roberson]

Replaces http://uk.mathworks.com/matlabcentral/answers/222009-suported-hardware-card-to-work-with-simulink

Answer 1

[Manikandan]

There are lot of HW are avilable, http://in.mathworks.com/hardware-support/home.html. as per your requirement simple Arduino low cost board is sufficient.