readtable on xml with single line

I store a table type into a xml file with writetable.

When reading this file with readtable, it parses the xml into a matlab table only if it is composed of multiple lines.

Otherwise, I have to use readstruct and then struct2table to read a "one line" table. If I use readtable instead, it returns an empty table.

Is there a trick to use readtable anyway when the table is composed of one line ?

Thank you very much,

Arthur

Answer 1

[dpb]

Using the example to construct a sample table

InsectSpecies = {'Monarch Butterfly';'Seven-spot Ladybird';'Orchid Mantis'; ...
    'American Bumblebee';'Blue Dasher Dragonfly'};
InsectOrder = {'Lepidoptera';'Coleoptera';'Mantodea';'Hymenoptera';'Odonata'};
InsectFamily = {'Nymphalidae';'Coccinellidae';'Hymenopodidae'; ...
    'Apidae';'Libellulidae'};
PredatoryInsect = logical([0;1;1;0;1]); 
T = table(InsectOrder,InsectFamily,PredatoryInsect);
T.Properties.RowNames = InsectSpecies;
T                                       % display table content

T = 5×3 table
                               InsectOrder        InsectFamily       PredatoryInsect
                             _______________    _________________    _______________

    Monarch Butterfly        {'Lepidoptera'}    {'Nymphalidae'  }         false     
    Seven-spot Ladybird      {'Coleoptera' }    {'Coccinellidae'}         true      
    Orchid Mantis            {'Mantodea'   }    {'Hymenopodidae'}         true      
    American Bumblebee       {'Hymenoptera'}    {'Apidae'       }         false     
    Blue Dasher Dragonfly    {'Odonata'    }    {'Libellulidae' }         true      

writetable(T,'InsectCollectionAll.xml',"WriteRowNames",true,"RowNodeName","Insect")
type InsectCollectionAll.xml            % show what was written

<?xml version="1.0" encoding="UTF-8"?>
<table>
    <Insect Row="Monarch Butterfly">
        <InsectOrder>Lepidoptera</InsectOrder>
        <InsectFamily>Nymphalidae</InsectFamily>
        <PredatoryInsect>false</PredatoryInsect>
    </Insect>
    <Insect Row="Seven-spot Ladybird">
        <InsectOrder>Coleoptera</InsectOrder>
        <InsectFamily>Coccinellidae</InsectFamily>
        <PredatoryInsect>true</PredatoryInsect>
    </Insect>
    <Insect Row="Orchid Mantis">
        <InsectOrder>Mantodea</InsectOrder>
        <InsectFamily>Hymenopodidae</InsectFamily>
        <PredatoryInsect>true</PredatoryInsect>
    </Insect>
    <Insect Row="American Bumblebee">
        <InsectOrder>Hymenoptera</InsectOrder>
        <InsectFamily>Apidae</InsectFamily>
        <PredatoryInsect>false</PredatoryInsect>
    </Insect>
    <Insect Row="Blue Dasher Dragonfly">
        <InsectOrder>Odonata</InsectOrder>
        <InsectFamily>Libellulidae</InsectFamily>
        <PredatoryInsect>true</PredatoryInsect>
    </Insect>
</table>

T=T(1,:);                               % keep only one row
writetable(T,'InsectCollectionOne.xml',"WriteRowNames",true,"RowNodeName","Insect")
type InsectCollectionOne.xml            % show what was written

<?xml version="1.0" encoding="UTF-8"?>
<table>
    <Insect Row="Monarch Butterfly">
        <InsectOrder>Lepidoptera</InsectOrder>
        <InsectFamily>Nymphalidae</InsectFamily>
        <PredatoryInsect>false</PredatoryInsect>
    </Insect>
</table>

clearvars                               % clean workspace
T=readtable('InsectCollectionAll.xml')  % try read table back

T = 5×4 table
         RowAttribute           InsectOrder      InsectFamily      PredatoryInsect
    _______________________    _____________    _______________    _______________

    "Monarch Butterfly"        "Lepidoptera"    "Nymphalidae"          "false"    
    "Seven-spot Ladybird"      "Coleoptera"     "Coccinellidae"        "true"     
    "Orchid Mantis"            "Mantodea"       "Hymenopodidae"        "true"     
    "American Bumblebee"       "Hymenoptera"    "Apidae"               "false"    
    "Blue Dasher Dragonfly"    "Odonata"        "Libellulidae"         "true"     

clearvars
T=readtable('InsectCollectionOne.xml')  % try one row read table back

Warning: Unable to automatically detect a table in the file: 'InsectCollectionOne.xml'.

To specify the location of a table in the XML file, use a name-value pair, such as 'TableNodeName' or 'RowSelector'.

Consider using READSTRUCT to import heterogeneous structured data.

T =

  0×0 empty table

T=readtable('InsectCollectionOne.xml','TableNodeName','Insect')  % try one row read table back

T =

  0×0 empty table

removes the warning, but it still didn't find a table.

There isn't anything different between the two xml files' content other than having only one record in one and more than one in the other; whatever code logic figures out the one should be able to figure out the other.

It appears to me to be a real bug, agreed.

Submit this to Mathworks as an official support request/bug at <Product Support Page>

ADDENDUM

I don't much use xml so not particularly familiar with expectations, but the parsing also doesn't preserve the type of the logical variable; I don't know whether this should be considered a bug or not(?).

[Kevin Gurney]

@dpb - regarding your addendum, readtable does not detect logical variables by default, so this is expected (although, this is something we have considered enhancing in the past). To import logical variables, you can use setvartype on the associated XMLImportOptions object to force import of a particular variable as a logical array.

Answer 2

[Kevin Gurney]

We are sorry to hear that you ran into this limitation @Arthur.

It looks like you are encountering a case where the detection algorithm used under the hood by readtable by default isn't able to reliably detect a table.

The detection algorithm looks for "uniform repeating structure" in a file. When the frequency and uniformity of this structure is high, the algorithm is generally more reliable at detecting "tabular" structure. This is why readtable works when there are multiple rows in the file, but does not when there is only one.

The fact that an empty table is returned when you specify "TableNodeName" explicitly is definitely unintuitive. This is something we will look into.

As a workaround you can specify "RowNowName" as "Insect" instead of "TableNodeName" and this should reliably detect the table regardless of the number of rows.

You can also specify full "XPath Selectors" to each tabular "component" in the file if you want to be even more precise when importing XML data as a table.

Please refer to the xmlImportOptions documentation for examples of how to specify XPath Selectors:

https://www.mathworks.com/help/matlab/ref/matlab.io.xml.xmlimportoptions.html#mw_f759a73a-720f-4239-9d92-a11187fea1b5

I hope that helps.

[dpb]

@Kevin Gurney - thanks for the background. As noted, I know virtually nothing about the internals of xml files, but naively I'd have thought that the section was labelled

<table>
....
</table>

would have been pertinent?