Problem joining blocks Simscape
조회 수: 23 (최근 30일)
이전 댓글 표시
Hi, I develop a circuit using Simscape blocks. My input signal is developed by simulink blocks, "random number + Matlab function block". I use the simulink-PS converter to join this signal to my circuit, but i can't. What is the problem? Thanks in advance.
댓글 수: 0
채택된 답변
Guy Rouleau
2011년 11월 9일
Are you connecting the output of the Simulink->PS converter to a source block?
I recommend looking at demos to understand the difference between a physical signal output by the S->PS block and the physical connection between Simscape components.
For more specific help, add more details or an image of your model.
댓글 수: 3
Guy Rouleau
2011년 11월 11일
Simscape should be good for your problem.
The problem is that Simscape does not know if the signal coming from the S-PS is your desired current or voltage.
You need a block to specify that, pick one of those:
http://www.mathworks.com/help/toolbox/physmod/simscape/ref/controlledcurrentsource.html
http://www.mathworks.com/help/toolbox/physmod/simscape/ref/controlledvoltagesource.html
For the voltage sensor, it should connect, try to connect it a bit farther from the Capacitor port.
추가 답변 (1개)
Aswin ram V
2022년 9월 3일
hi , direct connection between one or more physical signal converters found. Direct connections between physical signal converters is not currently supported.what's the problem?
댓글 수: 2
참고 항목
카테고리
Help Center 및 File Exchange에서 Composite Components에 대해 자세히 알아보기
제품
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!