Get specific data from if condition

Here is the code for BPSK modulation and demodulation:

bpskModulator = comm.BPSKModulator;
                bpskDemodulator = comm.BPSKDemodulator;
                errorRate = comm.ErrorRate;
                awgnChannel = comm.AWGNChannel('BitsPerSymbol',1);
                ebnoVec = 5:10; % Eb/No range
                berBPSK = zeros(size(ebnoVec));
                for n = 1:length(ebnoVec)
                    % Reset the error counter for each Eb/No value
                    reset(errorRate)
                    % Reset the array used to collect the error statistics
                    errVec = [0 0 0];
                    % Set the channel Eb/No
                    awgnChannel.EbNo = ebnoVec(n);
                    while errVec(2) < 200 && errVec(3) < 1e7
                        % Generate a 1000-symbol frame
                        data = double(codeword);
                        % Modulate the binary data
                        modData = bpskModulator(data);
                        % Pass the modulated data through the AWGN channel
                        rxSig = awgnChannel(modData);
                        % Demodulate the received signal
                        rxData = bpskDemodulator(rxSig);
                        % Collect the error statistics
                        errVec = errorRate(data,rxData);
                    end
                    % Save the BER data

my question is, How do I get the value of rxData if the eb/no value is 6?

Answer 1

[Sulaymon Eshkabilov]

If understood correctly, here is how to get it:

...
     for n = 1:length(ebnoVec)
                    % Reset the error counter for each Eb/No value
                    reset(errorRate)
                    % Reset the array used to collect the error statistics
                    errVec = [0 0 0];
                    % Set the channel Eb/No
                    awgnChannel.EbNo = ebnoVec(n);
                    while errVec(2) < 200 && errVec(3) < 1e7
                        % Generate a 1000-symbol frame
                        data = double(codeword);
                        % Modulate the binary data
                        modData = bpskModulator(data);
                        % Pass the modulated data through the AWGN channel
                        rxSig = awgnChannel(modData);
                        % Demodulate the received signal
                        rxData = bpskDemodulator(rxSig);
                        % Collect the error statistics
                        errVec = errorRate(data,rxData);
                    end
                    % Here is how to get the value (s) of rxData:
                    if n==2
                        D_ebno6=rxData;  % Stored under this variable
                        % disp(rxData)
                    end
                    % Save the BER data
                end