Fuel temperature in the Simscape fuel cell model
조회 수: 1 (최근 30일)
이전 댓글 표시
I am trying to use the fuel cell model of Simscape.
I want to calculate the mass flow rate of the fuel, however the temperature of the fuel is not known.
What is the definition of fuel temperature? Is it the "nominal temperature" of the model parameter?
Or dose the model use the standard reference conditions of the gas?
댓글 수: 2
Joel Van Sickel
2023년 2월 23일
How are you trying to calculate fuel flow rate? It can be specificied without knowing it's temperature. The fuel cell itself internally calculates it's temperature. You have to connect it to a thermal model, but you don't need to know the specific temperature as the model takes care of that for you. Have you seen this example:
답변 (1개)
Joel Van Sickel
2023년 4월 11일
편집: Joel Van Sickel
2023년 4월 21일
sorry, I should have answered this sooner. You can add sensors to measure different values, and you can use the probe block to read internal states of the fuel cell (use 23a to get access to all states). https://www.mathworks.com/help/simscape/ref/probe.html
For this type of model, you are providing the pressure and flow rate. This is a very simplistic model so you basically only have a single temperature of the fuel cell, which you could use as the temperate of your fuel.
댓글 수: 0
참고 항목
카테고리
Help Center 및 File Exchange에서 Gas Library에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!