필터 지우기
필터 지우기

Need to correct the matlab code for the question.

조회 수: 1 (최근 30일)
Vipul
Vipul 2022년 10월 8일
댓글: Vipul 2022년 10월 8일
Write the Matlab code for the above question.
I have written the following code, but there is some error..after Power=Torque*angular velocity.
Error in code, "Invalid expression. Check for missing multiplication operator, missing or unbalanced delimiters, or other syntax error. To construct matrices, use brackets instead of parentheses. "
Power=Torque*angular velocity
clc;clear all;close all;
w=1000:10:6000;
%Engine 1
a=0.03;
b=7.5e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
hold on
figure(2)
plot(w,P/1000,'LineWidth',1.5)
hold on
%Engine 2
a=0.02;
b=3.333e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
figure(2)
plot(w,P/1000,'LineWidth',1.5)
%Engine 3
a=0.015;
b=1.875e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
xlabel('{\omega}(rpm)')
ylabel('Torque (Nm)')
title('Torque Vs speed')
legend('Engine 1','Engine 2','Engine 3')
figure(2)
plot(w,P/1000,'LineWidth',1.5)
xlabel('{\omega}(rpm)')
ylabel('Power (kW)')
title('Power Vs speed')
legend('Engine 1','Engine 2','Engine 3')
function T=torque(w,a,b)
T=120+a*(w-1000)-b*(w-1000).^2;
end

채택된 답변

Ghazwan
Ghazwan 2022년 10월 8일
clc;clear all;close all;
w=1000:10:6000;
%Engine 1
a=0.03;
b=7.5e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
hold on
figure(2)
plot(w,P/1000,'LineWidth',1.5)
hold on
%Engine 2
a=0.02;
b=3.333e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
figure(2)
plot(w,P/1000,'LineWidth',1.5)
%Engine 3
a=0.015;
b=1.875e-6;
T=torque(w,a,b);
P=T*2*pi.*w/60;
figure(1)
plot(w,T,'LineWidth',1.5)
xlabel('{\omega}(rpm)')
ylabel('Torque (Nm)')
title('Torque Vs speed')
legend('Engine 1','Engine 2','Engine 3')
figure(2)
plot(w,P/1000,'LineWidth',1.5)
xlabel('{\omega}(rpm)')
ylabel('Power (kW)')
title('Power Vs speed')
legend('Engine 1','Engine 2','Engine 3')
function T=torque(w,a,b)
T=120+a*(w-1000)-b*(w-1000).^2;
end
  댓글 수: 2
Ghazwan
Ghazwan 2022년 10월 8일
you just need to remove the first line or put "%" at the beginning.
Vipul
Vipul 2022년 10월 8일
I tried, but there is another here down
for following line
>> T=torque(w,a,b);
Unrecognized function or variable 'torque'.

댓글을 달려면 로그인하십시오.

추가 답변 (0개)

카테고리

Help CenterFile Exchange에서 Assembly에 대해 자세히 알아보기

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by