Help with 'Variable 'sa' is undefined on some execution paths'

조회 수: 1 (최근 30일)
Jack
Jack 2015년 2월 3일
답변: Niels 2015년 2월 3일
Hi
I have an issue when I am trying to build an SVPWM Inverter model for my final year Uni project.
I have used the following paper as a guide as one of the authors also wrote a book on the subject, which I have attached.
I have adapted the code from this paper and I am getting an undefined variable error for 'sa' when looking at the diagnostic report the error does not occur for variables 'sb' or 'sc'.
Here is the code:
%Switching Function Matlab Code %Inputs are magnitude (u1), angle (u2) and ramp signal (u3)
function sf = aaa(u) ts = 0.0002; vdc = 1; max_peak_phase = vdc/sqrt(3); x = u(2); y = u(3); mag = (u(1)/max_peak_phase)*ts;
%Sector 1
if (x>=0)&&(x<(pi/3)); ta = mag*sin((pi/3)-x); tb = mag*sin(x); t0 = (ts-ta-tb);
t1 = [t0/4 ta/2 tb/2 t0/2 tb/2 ta/2 t0/4]; t1 = cumsum(t1); v1 = [0 1 1 1 1 1 0]; v2 = [0 0 1 1 1 0 0]; v3 = [0 0 0 1 0 0 0];
for j = 1:7;
if (y<t1(j))
break
end
end
sa = v1(j);
sb = v2(j);
sc = v3(j);
end
%Sector 2
if (x>=(pi/3))&&(x<(2*pi/3));
adv = x-(pi/3);
ta = mag*sin((pi/3)-adv);
tb = mag*sin(adv);
t0 = (ts-ta-tb);
t1 = [t0/4 ta/2 tb/2 t0/2 tb/2 ta/2 t0/4]; t1 = cumsum(t1); v1 = [0 0 1 1 1 0 0]; v2 = [0 1 1 1 1 1 0]; v3 = [0 0 0 1 0 0 0];
for j = 1:7;
if (y<t1(j))
break
end
end
sa = v1(j);
sb = v2(j);
sc = v3(j);
end
%Sector 3
if (x>=(2*pi/3))&&(x<pi);
adv = x-(2*pi/3);
ta = mag*sin((pi/3)-adv);
tb = mag*sin(adv);
t0 = (ts-ta-tb);
t1 = [t0/4 ta/2 tb/2 t0/2 tb/2 ta/2 t0/4]; t1 = cumsum(t1); v1 = [0 0 0 1 0 0 0]; v2 = [0 1 1 1 1 1 0]; v3 = [0 0 1 1 1 0 0];
for j = 1:7;
if (y<t1(j))
break
end
end
sa = v1(j);
sb = v2(j);
sc = v3(j);
end
%Sector 4
if (x>=-pi)&&(x<-(2*pi/3));
adv = x+pi;
ta = mag*sin(adv);
tb = mag*sin((pi/3)-adv);
t0 = (ts-ta-tb);
t1 = [t0/4 ta/2 tb/2 t0/2 tb/2 ta/2 t0/4]; t1 = cumsum(t1); v1 = [0 0 0 1 0 0 0]; v2 = [0 0 1 1 1 0 0]; v3 = [0 1 1 1 1 1 0];
for j = 1:7;
if (y<t1(j))
break
end
end
sa = v1(j);
sb = v2(j);
sc = v3(j);
end
%Sector 5
if (x>=-(2*pi/3))&&(x<-(pi/3));
adv = x+(2*pi/3);
ta = mag*sin(adv);
tb = mag*sin((pi/3)-adv);
t0 = (ts-ta-tb);
t1 = [t0/4 ta/2 tb/2 t0/2 tb/2 ta/2 t0/4]; t1 = cumsum(t1); v1 = [0 0 1 1 1 0 0]; v2 = [0 0 0 1 0 0 0]; v3 = [0 1 1 1 1 1 0];
for j = 1:7;
if (y<t1(j))
break
end
end
sa = v1(j);
sb = v2(j);
sc = v3(j);
end
%Sector 6
if (x>=-(pi/3))&&(x<0);
adv = x+(pi/3);
ta = mag*sin(adv);
tb = mag*sin((pi/3)-adv);
t0 = (ts-ta-tb);
t1 = [t0/4 ta/2 tb/2 t0/2 tb/2 ta/2 t0/4]; t1 = cumsum(t1); v1 = [0 1 1 1 1 1 0]; v2 = [0 0 0 1 0 0 0]; v3 = [0 0 1 1 1 0 0];
for j = 1:7;
if (y<t1(j))
break
end
end
sa = v1(j);
sb = v2(j);
sc = v3(j);
end
sf = [sa, sb, sc];
end
I apologise if this sounds really basic and if I have not asked correctly, I am a very basic user of Matlab and programming altogether and I am still trying to get an understanding.
Thanks
Jack

답변 (1개)

Niels
Niels 2015년 2월 3일
You have 6 if-statements. Could it be that your x falls out of the ranges you've specified?
Just for clarity - your total range varies from -pi to +pi, but it does not include +pi itself. Is that the way it should be?

카테고리

Help CenterFile Exchange에서 General Applications에 대해 자세히 알아보기

제품

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by