Hello, I'm trying to plot the I-V curve for a MOSFET, but I get a "Vectors must be the same length" error message. I don't understand why this is the case.

조회 수: 3(최근 30일)
Craig Egan Allistair Tan
Craig Egan Allistair Tan 2021년 11월 16일
댓글: Craig Egan Allistair Tan 2021년 11월 16일
clear all; close all; clc;
x1 = 0:0.01:0;
y1 = (0).*x1-(1/2).*x1.^2;
x2 = 0:0.01:6;
y2 = (1/2).*0^2;
x3 = 0:0.01:1;
y3 = (1).*x3-(1/2).*x3.^2;
x4 = 1:0.01:6;
y4 = (1/2).*1^2;
x5 = 0:0.01:2;
y5 = (2).*x5-(1/2).*x5.^2;
x6 = 2:0.01:6;
y6 = (1/2).*2^2;
x7 = 0:0.01:3;
y7 = (3).*x7-(1/2).*x7.^2;
x8 = 3:0.01:6;
y8 = (1/2).*3^2;
x9 = 0:0.01:4;
y9 = (4).*x9-(1/2).*x9.^2;
x10 = 4:0.01:6;
y10 = (1/2).*4^2;
x11 = 0:0.01:5;
y11 = (5).*x11-(1/2).*x11.^2;
x12 = 5:0.01:6;
y12 = (1/2).*5^2;
figure; hold on
x_1 = [x1 x2];
y_1 = [y1 y2];
x_2 = [x3 x4];
y_2 = [y3 y4];
x_3 = [x5 x6];
y_3 = [y5 y6];
x_4 = [x7 x8];
y_4 = [y7 y8];
x_5 = [x9 x10];
y_5 = [y9 y10];
x_6 = [x11 x12];
y_6 = [y11 y12];
b1 = plot(x_1,y_1,'yellow'); M1 = "V_G - V_{th} = 0";
b2 = plot(x_2,y_2,'green'); M2 = "V_G - V_{th} = 1";
b3 = plot(x_3,y_3,'blue'); M3 = "V_G - V_{th} = 2";
b4 = plot(x_4,y_4,'red'); M4 = "V_G - V_{th} = 3";
b5 = plot(x_5,y_5,'cyan'); M5 = "V_G - V_{th} = 4";
b6 = plot(x_6,y_6,'magenta'); M6 = "V_G - V_{th} = 5";
xlabel('V_D')
ylabel('I_D/K')
legend([b1,b2,b3,b4,b5,b6], [M1,M2,M3,M4,M5,M6], 'Location', 'SouthWest')

답변(1개)

VBBV
VBBV 2021년 11월 16일
clear all; close all; clc;
x1 = 0:0.01:6;
y1 = (0).*x1-(1/2).*x1.^2;
x2 = 0:0.01:6;
y2 = (1/2)*x2.^2;
x3 = 0:0.01:6;
y3 = (1).*x3-(1/2).*x3.^2;
x4 = 0:0.01:6;
y4 = (1/2)*x4.^2;
x5 = 0:0.01:6;
y5 = (2).*x5-(1/2).*x5.^2;
x6 = 0:0.01:6;
y6 = (1/2)*x2.^2;
x7 = 0:0.01:6;
y7 = (3).*x7-(1/2).*x7.^2;
x8 = 0:0.01:6;
y8 = (1/2)*x3.^2;
x9 = 0:0.01:6;
y9 = (4).*x9-(1/2).*x9.^2;
x10 = 0:0.01:6;
y10 = (1/2)*x4.^2;
x11 =0:0.01:6;
y11 = (5).*x11-(1/2).*x11.^2;
x12 = 0:0.01:6;
y12 = (1/2)*x5.^2;
figure; hold on
x_1 = [x1 x2];
y_1 = [y1 y2];
x_2 = [x3 x4];
y_2 = [y3 y4];
x_3 = [x5 x6];
y_3 = [y5 y6];
x_4 = [x7 x8];
y_4 = [y7 y8];
x_5 = [x9 x10];
y_5 = [y9 y10];
x_6 = [x11 x12];
y_6 = [y11 y12];
b1 = plot(x_1,y_1,'yellow'); M1 = "V_G - V_{th} = 0";
b2 = plot(x_2,y_2,'green'); M2 = "V_G - V_{th} = 1";
b3 = plot(x_3,y_3,'blue'); M3 = "V_G - V_{th} = 2";
b4 = plot(x_4,y_4,'red'); M4 = "V_G - V_{th} = 3";
b5 = plot(x_5,y_5,'cyan'); M5 = "V_G - V_{th} = 4";
b6 = plot(x_6,y_6,'magenta'); M6 = "V_G - V_{th} = 5";
xlabel('V_D')
ylabel('I_D/K')
legend([b1,b2,b3,b4,b5,b6], [M1,M2,M3,M4,M5,M6], 'Location', 'SouthWest')
use uniform vector size for xcoordinates. oneway is to use linspace function instead of defiining the specfic intervals of xdata.
  댓글 수: 1
Craig Egan Allistair Tan
Craig Egan Allistair Tan 2021년 11월 16일
(x_1,y_1) to (x_6,y_6) are supposed to be piecewise functions. It's why the intervals for the x-values are different. Is there another way I can code this?

댓글을 달려면 로그인하십시오.

태그

제품


릴리스

R2019a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by