DICOM Images show greyish
조회 수: 6 (최근 30일)
이전 댓글 표시
Hi there,
im curently working with CT and MRI Scans in DICOM Format. The MRI Images work completly fine, but the CT Images look this greyish. It is the same in the matlab Dicom Viewer but not in Online Viewers, there the Images are shown normal.
I already tried to rescale them, but it didn't help at all?
Has anybody an Idea where this comes from and how to fix it?
Thanks for your help :)
댓글 수: 7
DGM
2021년 10월 25일
편집: DGM
2021년 10월 25일
It depends what you mean by changing the contrast. The above example does increase the contrast.
A = rgb2gray(imread('https://www.mathworks.com/matlabcentral/answers/uploaded_files/777493/image.jpeg'));
range(double(A(:)))/mean(double(A(:))) % example contrast metric
A = mat2gray(A,double([mode(A(1,:)) max(A(:))]));
range(double(A(:)))/mean(double(A(:))) % check contrast again
imadjust will let you adjust input and output black/white points (linear) and optionally adjust gamma. stretchlim() can be used for finding the values needed by imadjust(). I'm sure there are other things that can be done too, depending on what you need. Phrases like "contrast adjustment" or "contrast enhancement" are unfortunately kind of vague, since they can mean contradictory things in different contexts.
답변 (2개)
Image Analyst
2021년 10월 25일
Try using [] in imshow() to scale your min to 0 and max to 255:
imshow(yourGrayScaleImage, []);
댓글 수: 21
Image Analyst
2021년 10월 26일
OK since the reconstruction diameter is 500 for one of the images, and the image is 512x512 for both images, what is the reconstruction diameter for the other image? If the discs are the same size in the real world then the cm per pixel spatial calibration factor must be different for the two images because the discs shows up with a different pixel diameter in the two images.
참고 항목
카테고리
Help Center 및 File Exchange에서 3-D Volumetric Image Processing에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!