Modelling of PV array in matlab simulink

조회 수: 55(최근 30일)
MEHER 2014년 7월 28일
댓글: kunal shankar 2022년 7월 11일
I am trying to construct a PV array in simulink. My motto is to observe characteristic for partial shading PV array with different irradiation's for each module.I have modeled individual PV modules as current sources with series and parallel combination of solar cells. According to equations a voltage feedback is required for this. To get this voltage feedback, I have connected a capacitor across current source. For an individual PV module its working fine as desired. Now when I am trying to connect two PV modules of 250W each in series and trying to observe characteristics across two modules by placing another capacitor in total. Instead of expected peak of 500W it is showing 330W.
How to connect two PV modules modeled as current source in series????
Please see the attached simulink file
  댓글 수: 1
Bikash kumar shaw
Bikash kumar shaw 2020년 10월 21일
how to add pv array in 2014b in macbook.Please help me

댓글을 달려면 로그인하십시오.


Rodney Tan
Rodney Tan 2016년 10월 10일
In MATLAB R2015a SimPowerSystems there is a PVArray block which you can model partial shading. PV module itself is a current source, you just need to configure it to a single module by setting parallel and series string to 1 and select any 250W module from the Module list. To model partial shading you need to connect two PVArray block in series with a bypass diode for each module. Input one PVArray block with 1000 W/m^2 and the other one with 300 W/m^2 for shading effect. Use a ramp block to drive the voltage source as voltage drop load and measure its current, voltage and power using XY Scope to visualized I-V and P-V partial shading curve. I also attached the screen capture and Simulink file for your reference.
For other methods of modeling PV Module you can refer to my file exchange link below
  댓글 수: 5
kunal shankar
kunal shankar 2022년 7월 11일
Is .m file available for this instead of slx?

댓글을 달려면 로그인하십시오.

lily mona
lily mona 2017년 6월 29일
please i need mppt under partal shading if it's possible waiting your answer thanks

khairi elrmali
khairi elrmali 2018년 6월 28일
PVArray block which you can model partial shading

shashank kumar
shashank kumar 2019년 9월 2일

Muhammad Ahsan
Muhammad Ahsan 2021년 8월 5일
I have 2020b version and I could not find the pv array in the simulink. Could some help me what should I do?
  댓글 수: 1
Mark Hilton Alejo
Mark Hilton Alejo 2021년 11월 8일
It's in the Simscape/Electrical/Specialized Power Systems/Renewables/Solar

댓글을 달려면 로그인하십시오.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by