필터 지우기
필터 지우기

xpctarget ping fails

조회 수: 4 (최근 30일)
James
James 2011년 8월 4일
Hi,
I have 2 target PCs - T1 and T2.
I configured 'xpcexplr' and boot both PCs. (all configurations are the same but only with different IPs)
Both PCs succesfully boot into the xPC environment.
However, in the xPC environment, 'xpctargetping' fails for T2 but success for T1.
Any ideas why?
Thanks in advance.

답변 (3개)

James
James 2011년 8월 4일
Additional info: For both PCs I can ping from the DOS environment. Crossover cable is used. Direct connection between host and target PCs.

Kaustubha Govind
Kaustubha Govind 2011년 8월 4일
I don't have much personal experience with this, but this documentation page might help: xpctest: Test 2 Fails.
  댓글 수: 1
James
James 2011년 8월 5일
Hi, Thanks for your suggestion. I've checked the IP and ethernet cards. They should be alright.

댓글을 달려면 로그인하십시오.


Arnaud Miege
Arnaud Miege 2011년 8월 5일
How do you use xpctargetping? If you just run xpctargetping without any arguments, it will ping only the default target defined in xPC Target Explorer. To ping other targets, you need to specify the IP address of the target PC explicitly, see xpctargetping for more information.
HTH
Arnaud

카테고리

Help CenterFile Exchange에서 Multicore Processor Targets에 대해 자세히 알아보기

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by