Variable not showing up in workspace.

How come [x(i) y(i) theta(i)] does not show up in the workspace when I run this code.

clear all; clc; close all;
global Cc Co Ct tau fmax fmin i_ww
global rthr gthr bthr

% ---------Adjustable Parameters---------
tau = 10; %run time in seconds
rthr = 60; % red threshold
bthr = 60; % blue threshold
gthr = 60; % green threshold
frr = 2; % red: 1=rear, 2=front
frb = 1; % blue: 1=rear, 2=front
Cc = [1 1 .1 .1 .01 .01];
fmax = 0.144;
fmin = -0.045;
TLB = .4*0; %Total Length of the Boat 
% ---------------------------------------
if (frr+frb~=3), error('Wrong front/rear combination'); end
i_ww = input('Enter 0 for no wave and wind or 1 for both: ');
% if i_ww == 1
%     Cc = [1 1 .1 .1 .1 .1];
% end

% --Camera setup--
delete(imaqfind);
vid = videoinput('dcam'); 
vid.ReturnedColorSpace = 'bayer';
vid.BayerSensorAlignment = 'rggb';
vid.ROIPosition = [60 40 960 720];
vid.FramesPerTrigger = 1;
triggerconfig(vid,'manual')
vid.TriggerRepeat = Inf;
src = getselectedsource(vid); % Device Specific properties
src.Gain = 500;
start(vid)
pause(0.5)

gflag = 0;
i = 0;
ij = 0;
time = 0;
while time <= tau;
    % 2- finds the 2 diode locations
    trigger(vid)
    [img time] = getdata(vid); % waits for frame to be available
    [rrpts crpts rgpts_t cgpts_t rbpts cbpts] = gsearch_rgb(img);

     if (length(rrpts) ~= 2) && (length(rbpts) ~= 2) || (length(rrpts) ~= 1) && (length(rbpts) ~= 1)
          display([num2str(time) 's  red:' num2str(length(rrpts)) ' blue:' num2str(length(rbpts))])
          ij = ij + 1
          missed_leds(:,:,:,ij) = img;
     else
          i = i + 1;
          if i == 1
              time0 = time;
          end
          t(i,1) = time - time0;
          if length(rrpts) == 2
              r_tr = rrpts(1) + crpts(1);
              r_tr2 = rrpts(2) + crpts(2);
              b_tr = rbpts(1) + cbpts(1);
              b_tr2 = rbpts(2) + cbpts(2);
              if i == 1
                  frr1 = 1; frr2 = 2;
                  frb1 = 1; frb2 = 2;
              else
                  if abs(r_tr-r_tr_old) < abs(r_tr2-r_tr_old)
                      frr1 = 1; frr2 = 2;
                  else
                      frr1 = 2; frr2 = 1;
                  end
                  if abs(b_tr-b_tr_old) < abs(b_tr2-b_tr_old)
                      frb1 = 1; frb2 = 2;
                  else
                      frb1 = 2; frb2 = 1;
                  end
              end
              % --USV--
              ip(frr) = crpts(frr1);
              jp(frr) = rrpts(frr1);
              ip(frb) = cbpts(frb1);
              jp(frb) = rbpts(frb1);
              ijp = [ip jp];
              [x(i) y(i) theta(i)] = cam_calib(ijp);

              % --Target--
              ip(frr) = crpts(frr2);
              jp(frr) = rrpts(frr2);
              ip(frb) = cbpts(frb2);
              jp(frb) = rbpts(frb2);
              ijp = [ip jp];
              [xt(i) yt(i) thetat(i)] = cam_calib(ijp);
              xt(i) = xt(i) - TLB*cos(thetat(i));
              yt(i) = yt(i) - TLB*sin(thetat(i));
          else
              % --USV--
              ip(2) = crpts(1);
              jp(2) = rrpts(1);
              ip(1) = cbpts(1);
              jp(1) = rbpts(1);
              ijp = [ip jp];
              [x(i) y(i) theta(i)] = cam_calib(ijp);
              xt(i) = 1.5 + 0.5*cos(2*pi*t(i)/20);
              yt(i) = 2 + 0.5*sin(2*pi*t(i)/20);
              thetat(i) = 2*pi*t(i)/20 + pi/2;
          end

          Cos(i,1) = length(cgpts)/4;
          n_o = Cos(i,1);
          %Ct = [xi yi theta0 xf yf w0 k10 k20 eps_lc v1 v2 tc dt1 dist k10t k20t]
          if i == 1
              if n_o == 0
                  Ct = [0 0 0 0 0 .2 .05 .05 0 0 0 .1 .1 1 .25 .25];
              else
                  Ct = [0 0 0 0 0 .2 .1 .1 0 0 0 .1 .1 1 .1 .1];
                  %Ct = [0 0 0 0 0 .2 .07 .07 0 0 0 .1 .1 1 .07 .07];%better for cw
                  %Cc = [1 1 .1 .1 .1 .1];
              end
              Ct(1) = x(1); Ct(2) = y(1); Ct(3)=theta(1);
              Ct(4) = xt(1); Ct(5) = yt(1);
          end

          % --Obstacles--
          Co(1) = n_o;
          if n_o > 0
              [pxobs pyobs] = cam_calib_obs(cgpts,rgpts);
              d_obs_old = 1e10;
              obs_grp(1:n_o,1:4) = 0;
              obs_grp(1,1) = 1;
              if i==1
                  cgpr = 1:4*n_o; %remaining grean LED's to be sorted
                  for i1 = 1:n_o-1
                      for ii1 = 1:length(cgpr)
                          for ii2 = 1:length(cgpr)
                              d_obs(ii2) = sqrt((pxobs(cgpr(ii2)) - pxobs(cgpr(ii1)))^2 + ...
                                  (pyobs(cgpr(ii2)) - pyobs(cgpr(ii1)))^2);
                          end
                      end
                      [d_o_s id_o_s] = sort(d_obs(1:length(cgpr)));
                      obsn(i1,:) = id_o_s(1:4);
                      clear cgpr;
                      cgpr = id_o_s(5:end);
                  end
                  if n_o > 0
                      obsn(n_o,:) = cgpr;
                  end
              end
              %Co = [n_o x_oi y_oi v_o1 v_o2 a b phi phidot]
              for ii1 = 1:Cos(i,1)
                  ii3 = 8*(ii1-1);
                  Cos(i,ii3+2) = sum(pxobs(obsn(ii1,:)))/4; %x
                  Cos(i,ii3+3) = sum(pyobs(obsn(ii1,:)))/4; %y
                  Cos(i,ii3+4) = 0;
                  Cos(i,ii3+5) = 0;
                  disd(1) = sqrt((pyobs(obsn(ii1,1))-pyobs(obsn(ii1,4)))^2+(pxobs(obsn(ii1,1))-pxobs(obsn(ii1,4)))^2);
                  disd(2) = sqrt((pyobs(obsn(ii1,2))-pyobs(obsn(ii1,4)))^2+(pxobs(obsn(ii1,2))-pxobs(obsn(ii1,4)))^2);
                  disd(3) = sqrt((pyobs(obsn(ii1,3))-pyobs(obsn(ii1,4)))^2+(pxobs(obsn(ii1,3))-pxobs(obsn(ii1,4)))^2);
                  [disd idisd] = sort(disd);
                  Cos(i,ii3+6) = disd(2)*1.2; %a
                  Cos(i,ii3+7) = disd(1)*1.2; %b
                  Cos(i,ii3+8) = atan((pyobs(obsn(ii1,idisd(2)))-pyobs(obsn(ii1,idisd(1))))/...
                      (pxobs(obsn(ii1,idisd(2)))-pxobs(obsn(ii1,idisd(1))))); %phi
                  Cos(i,ii3+9) = 0;
              end
              Co = Cos(i,:);
          end

          r_tr_old = r_tr;
          b_tr_old = b_tr;

      end % if all leds found
  end % while loop
  stop(vid);

Answer 1

[Walter Roberson]

if length(rrpts) was not 2 and one of the other conditions in

(length(rrpts) ~= 2) && (length(rbpts) ~= 2) || (length(rrpts) ~= 1) && (length(rbpts) ~= 1)

did not hold, then you would not execute the code that assigns to x(i) y(i) theta(i)