Get Started with WLAN Toolbox

WLAN Toolbox™ provides standards-compliant functions for the design, simulation, analysis, and testing of wireless LAN communications systems. It includes configurable physical layer waveforms for the IEEE^® 802.11™ family of standards. It also provides transmitter, channel modeling, and receiver operations, including channel coding, modulation, spatial stream mapping, and MIMO receivers.

The toolbox provides reference designs to help you perform baseband link-level simulations and multi-node system-level simulations. You can generate waveforms and customize test benches, either programmatically or interactively, using the Wireless Waveform Generator app. You can generate and parse common MAC frames. You can also perform signal measurements such as channel power, spectrum mask, and occupied bandwidth, and create test benches for the end-to-end simulation of WLAN communications links.

You can study the effects of RF designs and interference on system performance. Using WLAN Toolbox with RF instruments or hardware support packages, you can connect your transmitter and receiver models to radio devices and verify your designs via over-the-air transmission and reception.

Tutorials

• 802.11 Standards Supported by WLAN Toolbox for PHY Modeling
  

  Describes the IEEE 802.11 standards supported by WLAN Toolbox for physical layer modeling.

• WLAN Radio Frequency Channels
  

  This example describes WLAN radio frequency channel designations and shows how to calculate the channel center frequency in accordance with IEEE® 802.11™ specifications.

• App-Based WLAN Waveform Generation
  

  Generate IEEE 802.11 waveforms by using the WLAN Waveform Generator app.

• App-Based Generation and Analysis of WLAN Waveform
  

  Learn about app-based generation and analysis of a WLAN Waveform.

• Get Started with WLAN System-Level Simulation in MATLAB
  

  Create a multinode WLAN system-level simulation consisting of an IEEE 802.11ax™ access point (AP) and a station (STA) by using WLAN Toolbox.

• Generate and Parse WLAN MAC Frames
  

  Configure and generate WLAN MAC frames, then recover frame contents by decoding.

• WLAN Channel Models
  

  Using WLAN channel models to add channel impairments to WLAN transmissions.

• Packet Recovery
  

  Describes recovery of WLAN packets for various PPDU formats.

• Transmit-Receive Chain
  

  Describes transmit-receive processing chains you can model using WLAN Toolbox.

About WLAN

• What Is WLAN?
  

  Describes WLAN for the benefit of the new user. Also indicates scope of coverage for WLAN Toolbox.

• WLAN PPDU Structure
  

  Describes the WLAN PPDUs you can model by using WLAN Toolbox.

• WLAN MAC Frame Structure
  

  Describes WLAN MAC protocol, general MAC frame structure, and types of MAC frame you can generate with WLAN Toolbox.

• Overview of Wi-Fi 7 (IEEE 802.11be)
  

  Learn the concepts of IEEE 802.11be™ or Wi-Fi^® 7 standard.