안테나와 수신기의 이득과 손실
스캐닝 및 고정 빔 레이다의 하드웨어 및 신호 처리 인자와 손실을 모델링합니다.
함수
aperture2gain | Convert effective aperture to gain |
arrayscanloss | Loss due to electronic scanning off broadside |
beamdwellfactor | Range-dependent loss for rapidly scanning beam |
beamloss | Beam shape loss for Gaussian antenna pattern |
gain2aperture | Convert gain to effective aperture |
solidangle | Solid angle of region bounded by azimuth and elevation angles |
binaryintloss | Loss due to M-of-N binary pulse integration |
cfarloss | Loss due to constant false alarm rate (CFAR) adaptive processing |
eclipsingloss | Loss due to pulse eclipsing |
eclipsingfactor | Range-dependent eclipsing factor |
matchingloss | Receiver filter matching loss |
mtifactor | Improvement factor due to moving target indicator (MTI) processing |
mtiloss | Losses due to moving target indicator (MTI) processing |
noisepow | Receiver noise power |
quanttemp | Quantization temperature |
polloss | Polarization loss |
stcfactor | Sensitivity time control (STC) factor |
systemp | Receiver system-noise temperature |
앱
| 레이다 디자이너 | Model radar gains and losses and assess performance in different environments |
추천 예제
Introduction to Pulse Integration and Fluctuation Loss in Radar
Compute the radar detectability factor, or minimum signal-to-noise ratio (SNR) required to declare a detection, for a radar system given a set of performance requirements.
- R2021b 이후
- 라이브 스크립트 열기
Introduction to Scanning and Processing Losses in Pulse Radar
Losses that impact the radar detectability factor and are dependent on the components of the signal processing chain, the type of the pulse integration, the target fluctuation model, and several other factors that are discussed.
- R2021b 이후
- 라이브 스크립트 열기
Modeling Radar Detectability Factors
Improve the fidelity of the radar range equation analysis by including a detailed loss budget.
MTI Improvement Factor for Land-Based Radar
Show the moving target indication (MTI) improvement factor and investigate the effects of frequency, PRF, number of pulses, and coherent vs noncoherent processing on MTI performance.
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
웹사이트 선택
번역된 콘텐츠를 보고 지역별 이벤트와 혜택을 살펴보려면 웹사이트를 선택하십시오. 현재 계신 지역에 따라 다음 웹사이트를 권장합니다:
또한 다음 목록에서 웹사이트를 선택하실 수도 있습니다.
사이트 성능 최적화 방법
최고의 사이트 성능을 위해 중국 사이트(중국어 또는 영어)를 선택하십시오. 현재 계신 지역에서는 다른 국가의 MathWorks 사이트 방문이 최적화되지 않았습니다.
미주
- América Latina (Español)
- Canada (English)
- United States (English)
유럽
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)



