Ideal mechanical rotational inertia
Simscape / Foundation Library / Mechanical / Rotational Elements
The Inertia block represents an ideal mechanical translational inertia that is described with the following equation:
T is inertia torque.
J is inertia.
ω is angular velocity.
t is time.
By default, the block has one mechanical translational conserving port. The block positive direction is from its port to the reference point. This means that the inertia torque is positive if inertia is accelerated in the positive direction.
In some applications, it is customary to display inertia in series with other elements in the block diagram layout. To support this use case, the Number of graphical ports parameter lets you display a second port on the opposite side of the block icon. The two-port variant is purely graphical: the two ports have the same angular velocity, so the block functions exactly the same whether it has one or two ports. The block icon changes depending on the value of the Number of graphical ports parameter.
|Number of graphical ports||Block Icon|
To set the priority and initial target values for the block variables prior to simulation, use the Variables tab in the block dialog box (or the Variables section in the block Property Inspector). For more information, see Set Priority and Initial Target for Block Variables.
I— Port that connects inertia to the circuit
Mechanical rotational conserving port that connects the inertia to the physical network.
J— Second graphical port
Second mechanical rotational conserving port that lets you connect the inertia in series with other elements in the block diagram. This port is rigidly connected to port I, therefore the difference between the one-port and two-port block representations is purely graphical.
To enable this port, set the Number of graphical ports
Inertia— Constant inertia
0.01 kg*m^2(default) | positive scalar
Inertia value. The inertia is constant during simulation.
Number of graphical ports— Select whether the block is graphically connected to the side of a circuit or in series with other elements
Select how to connect the block to the rest of the circuit:
1 — The block has one conserving port that
connects it to the mechanical rotational circuit. When the block has one port,
attach it to a connection line between two other blocks.
2 — Selecting this option exposes the second
port, which lets you connect the block in series with other blocks in the circuit.
The two ports are rigidly connected and have the same angular velocity, therefore
the block functions exactly the same as if it had one port.