# azel2uv

Convert azimuth/elevation angles to u/v coordinates

## Syntax

## Description

converts
the azimuth/elevation
angle pairs to their corresponding coordinates in `UV`

= azel2uv(`AzEl`

)*u*/*v* space.

## Examples

### Conversion of Azimuth and Elevation to UV

Find the corresponding *uv* representation for 30° azimuth and 0° elevation.

uv = azel2uv([30;0])

`uv = `*2×1*
0.5000
0

## Input Arguments

`AzEl`

— Azimuth/elevation angle pairs

two-row matrix

Azimuth and elevation angles, specified as a two-row matrix. Each column of the matrix
represents an angle pair in the form `[azimuth;elevation]`

.
Azimuth angles must lie in the range [*-90, 90*]. Units are
in degrees.

**Data Types: **`double`

## Output Arguments

`UV`

— Angle in u/v space

two-row matrix

Angle in *u*/*v* space, returned
as a two-row matrix. Each column of the matrix represents an angle
in the form [*u*; *v*]. The matrix
dimensions of `UV`

are the same as those of `AzEl`

.

## More About

### Azimuth Angle, Elevation Angle

The *azimuth angle* of a vector is the angle between
the *x*-axis and the orthogonal projection of the vector onto the
*xy* plane. The angle is positive in going from the
*x* axis toward the *y* axis. Azimuth angles lie
between –180 and 180 degrees. The *elevation angle* is the angle
between the vector and its orthogonal projection onto the *xy*-plane. The
angle is positive when going toward the positive *z*-axis from the
*xy* plane. By default, the boresight direction of an element or array
is aligned with the positive *x*-axis. The boresight direction is the
direction of the main lobe of an element or array.

**Note**

The elevation angle is sometimes defined in the literature as the angle a vector makes
with the positive *z*-axis. The MATLAB^{®} and Phased Array System Toolbox™ products do not use this definition.

This figure illustrates the azimuth angle and elevation angle for a vector shown as a green solid line.

### U/V Space

The *u/v* coordinates for
the positive hemisphere *x* ≥ 0 can be derived
from the phi
and theta angles.

The relation between these two coordinates systems is

$$\begin{array}{l}u=\mathrm{sin}\theta \mathrm{cos}\varphi \\ v=\mathrm{sin}\theta \mathrm{sin}\varphi \end{array}$$

In these expressions, φ and θ are the phi and theta angles, respectively.

To convert azimuth and elevation to *u* and *v* use the
transformation

$$\begin{array}{l}u=\mathrm{cos}el\mathrm{sin}az\\ v=\mathrm{sin}el\end{array}$$

which is valid only in the range *abs(az)≤=90*.

The values of *u* and *v* satisfy
the inequalities

$$\begin{array}{l}-1\le u\le 1\\ -1\le v\le 1\\ {u}^{2}+{v}^{2}\le 1\end{array}$$

Conversely, the phi and theta angles can be written in terms
of *u* and *v* using

$$\begin{array}{l}\mathrm{tan}\varphi =v/u\\ \mathrm{sin}\theta =\sqrt{{u}^{2}+{v}^{2}}\end{array}$$

The azimuth and elevation angles can also be written in terms of *u* and
*v*:

$$\begin{array}{l}\mathrm{sin}el=v\\ \mathrm{tan}az=\frac{u}{\sqrt{1-{u}^{2}-{v}^{2}}}\end{array}$$

### Phi Angle, Theta Angle

The phi angle (*φ*) is the angle from the positive
*y*-axis to the vector’s orthogonal projection onto the
*yz* plane. The angle is positive toward the positive
*z*-axis. The phi angle is between 0 and 360 degrees. The theta angle
(*θ*) is the angle from the *x*-axis to the vector
itself. The angle is positive toward the *yz* plane. The theta angle is
between 0 and 180 degrees.

The figure illustrates phi and theta for a vector that appears as a green solid line.

The coordinate transformations between φ/θ and *az/el* are described by
the following equations

$$\begin{array}{l}\mathrm{sin}el=\mathrm{sin}\varphi \mathrm{sin}\theta \\ \mathrm{tan}az=\mathrm{cos}\varphi \mathrm{tan}\theta \\ \mathrm{cos}\theta =\mathrm{cos}el\mathrm{cos}az\\ \mathrm{tan}\varphi =\mathrm{tan}el/\mathrm{sin}az\end{array}$$

## Extended Capabilities

### C/C++ Code Generation

Generate C and C++ code using MATLAB® Coder™.

Usage notes and limitations:

Does not support variable-size inputs.

## Version History

**Introduced in R2012a**

## MATLAB 명령

다음 MATLAB 명령에 해당하는 링크를 클릭했습니다.

명령을 실행하려면 MATLAB 명령 창에 입력하십시오. 웹 브라우저는 MATLAB 명령을 지원하지 않습니다.

Select a Web Site

Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .

You can also select a web site from the following list:

## How to Get Best Site Performance

Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.

### Americas

- América Latina (Español)
- Canada (English)
- United States (English)

### Europe

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)