This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Matrox Hardware

Troubleshooting Matrox Devices

Device Discovery

If you are having trouble using the Image Acquisition Toolbox™ software with a supported Matrox® frame grabber, try the following:

  1. Install the Image Acquisition Toolbox Support Package for Matrox Hardware.

    Starting with version R2014a, each adaptor is available separately through MATLAB® Add-Ons. See Image Acquisition Support Packages for Hardware Adaptors for information about installing the adaptors.

  2. Verify that you have a supported board and driver version in the Third-Party Requirements section on the MathWorks website (www.mathworks.com/hardware-support/matrox.html). If you discover that you are using an unsupported driver version, visit the Matrox website (www.matrox.com) to download the correct drivers.

    Note that the matroxcam and matroxlist functions that are available with the matroxcam object starting in release R2015a work with MIL or MIL-Lite 10.x only. Use of the matrox adaptor with the videoinput object can use either MIL 9 or 10.

    Find out the driver version you are using on your system. To learn how to get this information, see Determining the Driver Version for Matrox Devices.

  3. Verify that your image acquisition hardware is functioning properly.

    For Matrox devices, run the application that came with your hardware, Matrox Intellicam, and verify that you can receive live video.

  4. Make sure no other application is accessing the frame grabber.

Note

There is no difference between MIL and MIL-Lite software inside of MATLAB. They both work with Matrox Imaging devices.

Determining the Driver Version for Matrox Devices

To determine the Matrox Imaging Library version you are using, run the Matrox MIL Configuration utility. You can access this software through the Windows® Start button.

Select Start > Programs > Matrox Imaging Products > MIL Configuration.

The software version is listed on the Information tab.

Note

As of version R2014b, the Image Acquisition Toolbox supports MIL 10, and that is the recommended version to use.