이 번역 페이지는 최신 내용을 담고 있지 않습니다. 최신 내용을 영문으로 보려면 여기를 클릭하십시오.
밸브 및 오리피스
R2026a2상 유체 도메인에서 오리피스, 밸브, 밸브 액추에이터를 모델링하려면 다음 블록을 사용하십시오.
Simscape 블록
 | 4-Way 2-Position Directional Valve (2P) | 4-Way 2-Position Directional Valve in the two-phase fluid domain (R2024b 이후) |
 | 4-Way 3-Position Directional Valve (2P) | 4-way, 3-position directional valve in the two-phase fluid domain (R2024b 이후) |
 | Check Valve (2P) | Check valve in a two-phase fluid network |
 | Thermostatic Expansion Valve (2P) | Flow control valve that maintains evaporator superheat |
 | Pressure Relief Valve (2P) | Pressure relief valve in a two-phase fluid network |
 | Pressure-Reducing Valve (2P) | Pressure-reducing valve in a two-phase fluid network |
 | Multiposition Valve Actuator | Multiposition actuator in any fluid domain |
 | Proportional Valve Actuator | Power-controlled valve actuator in any fluid domain |
 | Orifice (2P) | Constant- or variable-area orifice in a two-phase fluid network |
도움말 항목
- Building a Custom Valve
Model a custom valve with orifice blocks.
추천 예제
Residential Air Source Heat Pump
Models an air source heat pump system that is used to heat a residential building having hot-water radiators for heat distribution. The two-phase fluid refrigerant takes up heat from the environment moist air mixture and transfers heat to water. The compressor drives the R410a refrigerant through a condenser, a thermostatic expansion valve, and an evaporator. An accumulator ensures that only vapor returns to the compressor.
Residential Ground Source Heat Pump
Models a ground source heat pump system that is used to heat a residential building having hot-water radiators for heat distribution. The ground source heat pump uses R410a, a two-phase fluid refrigerant, as the working fluid. The heat pump takes up the naturally existing heat stored in the ground and transfers the heat to the hot-water radiators. The compressor drives the refrigerant through a condenser, a thermostatic expansion valve, and an evaporator. An accumulator ensures that only vapor returns to the compressor. A receiver ensures that only liquid returns to the thermostatic expansion valve.
