Supported Hardware and Required Software
Supported Hardware
The Embedded Coder® Support Package for Infineon® AURIX™ TC3x Microcontrollers supports the following boards:
Infineon AURIX TC375 Lite Kit
Infineon AURIX TC387 Motor Control Kit
Infineon AURIX TC397 Triboard
Custom boards from Infineon AURIX TC37x series
Custom boards from Infineon AURIX TC38x series
Custom boards from Infineon AURIX TC39x series
Note
The Device Series in Configuration Parameters window must match the hardware board connected for deploying the application model. To change the Device Series, press Ctrl+E to open Configuration Parameters window and go to Hardware Implementation > Device Series.
Supported Third-Party Tools
To run the Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers, you will need the following third-party tools.
| Third-Party Toolchain | Description |
|---|---|
Infineon Low Level Driver (iLLD) | Follow the hardware setup window to download and install. |
TASKING(R) VX-toolset for TriCore | To compile and run the code. Follow the hardware setup window to download and install. |
| HighTec TriCore® Development Platform | To compile and run the code. Follow the hardware setup window to download and install. |
| Synopsys® Virtualizer Runtime | To build and test your model on virtual prototyping without the Infineon AURIX hardware board. You must install both Synopsys Virtualizer Development Kit and Synopsys Virtualizer Runtime to use virtual prototyping. Follow the hardware setup window to download and install. |
| Synopsys Virtualizer Development Kit | To build and test your model on virtual prototyping without the Infineon AURIX hardware board. You must install both Synopsys Virtualizer Development Kit and Synopsys Virtualizer Runtime to use virtual prototyping. Follow the hardware setup window to download and install. |
| Infineon TAS/DAS | To connect host computer to your hardware board for deployment of the generated code. Follow the hardware setup window to download and install. |
Lauterbach (Trace32) debugger or PLS UDE Microcontroller debugger | To debug the generated code and executables. Download and install outside the MATLAB environment. |
This table lists all the supported third-party tools for MATLAB®.
| MATLAB Version | iLLD | TASKING(R) VX-toolset for TriCore | HighTec TriCore Development Platform | Synopsys Virtualizer Development Kit | Synopsys Virtualizer Runtime | Infineon TAS/ DAS |
|---|---|---|---|---|---|---|
| MATLAB 24.1 (R2024a) | 1.0.1.16.0 | 6.3r1 | 4.9.4.1 | 2.6.0 | Q-2020.06-SP2 | 8.0.5 |
| MATLAB 24.2 (R2024b) | 1.0.1.17.0 | 6.3r1 | 4.9.4.1 | 2.6.0 | Q-2020.06-SP2 | 8.0.5 |
| MATLAB 25.1 (R2025a) | 1.0.1.18.0 | 6.3r1 | 4.9.4.1 | 2.6.0 | Q-2020.06-SP2 | 8.0.5 |
| MATLAB 25.2 (R2025b) | 1.0.1.18.0 | 6.3r1 | 4.9.4.1 | 2.6.0 | Q-2020.06-SP2 | 8.0.5 |
Virtual Prototyping
The Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers is verified in Synopsys Virtual Prototyping (VP) Virtualizer.
Virtual Prototyping (VP) provides an alternative platform that can simulate all the processing units, memories and peripherals available in Infineon AURIX TC3x MCU. You can build and test your model on virtual prototyping without the hardware using the Synopsys Virtual Prototyping (VP) Virtualizer.
MathWorks Products
The following MathWorks products are required for using Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers.
MATLAB
Embedded Coder
Simulink®
Simulink Coder™
Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers
Recommended Products
Motor Control Blockset™
Fixed-Point Designer™
