PSFB Converter with ZVS Switching
PSFB Converter:
I have simulated a PSFB converter with soft switching (ZVS).
Switching Frequency (fs) = 100KHz.
Each leg is operated at a fixed frequency and a duty cycle of 50% (48% with dead band included).
The deadband for both legs are 120ns
the phase shift between the legs is 0.2*Ts (can be changed by changing the factor 0.2 in P3 and P4 generator blocks)
Before starting the simulation, the following variables need to be assigned:
C = 1e-11;
C_r = 0.001;
A = 10;
The output voltage is D*Vin where D is the duty of the primary voltage of the transformer (1:1 transformer is used).
Leakage inductance and magnetizing inductance are chosen as to satisfy the soft switching conditions.
Note: ZVS is not achieved at small loads but the Lr and Cr can be altered to get the desired soft switching conditions.
인용 양식
Rushi Jariwala (2024). PSFB Converter with ZVS Switching (https://www.mathworks.com/matlabcentral/fileexchange/65615-psfb-converter-with-zvs-switching), MATLAB Central File Exchange. 검색됨 .
MATLAB 릴리스 호환 정보
플랫폼 호환성
Windows macOS Linux카테고리
- Physical Modeling > Simscape > Customization > Creating Custom Components and Libraries > Pulse width modulation (PWM) >
태그
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!버전 | 게시됨 | 릴리스 정보 | |
---|---|---|---|
1.0.0.0 |