필터 지우기
필터 지우기

Adding contact blocks to a model imported from Inventer into Simscape

조회 수: 6 (최근 30일)
A
A 2021년 4월 26일
댓글: A 2021년 4월 28일
I have imported an Inventer CAD model into simscape multibody and added contact blocks to the model, but the contact simulation does not work.
I don't think there is a problem with the contact blocks because I added them in Simscape after importing.
So I think the problem is with the solid blocks. Here are the imported solid blocks and the common solid blocks used in Simscape.
          
↑common solid blocks          ↑imported solid blocks
What are the differences between the two solid blocks, and what are some tips and tricks for adding contact blocks to an imported model for simulation?

채택된 답변

Juan Sagarduy
Juan Sagarduy 2021년 4월 26일
Hi there
You need a spatial force contact block taking in both geometries to resolve the contact. Modeling Contact Force Between Two Solids - MATLAB & Simulink (mathworks.com)
If the contact is not captured, it could be caused by a solver resolution issue (time step does not get small enough to capture the contact) or by that the convex hull approximation of the bodies leads to a non-realistic contact event.
If the problem persists, I'll recomend contacting our Technical Support to sort the root cause of the problem.
Good luck/Juan
  댓글 수: 3
Juan Sagarduy
Juan Sagarduy 2021년 4월 27일
Hi there
It looks to me as if you need to set a value for the max step size in the solver that is low enough. Try with 10e-6 and then see if the contact is captured. Then you can increase that value until the contact is no longer captured. This happens every now and then with contact simulations, the auto value for max step is tsim/50. so it is easy for Simulink to miss when the contact occurs.
let me know if this works.
BR Juan
A
A 2021년 4월 28일
After changing the maximum step size of the solver, the simulation was successful. Thank you very much.
The simulation results and solver are attached as a zip file.

댓글을 달려면 로그인하십시오.

추가 답변 (0개)

카테고리

Help CenterFile Exchange에서 Applications에 대해 자세히 알아보기

제품


릴리스

R2020a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by