How to smooth a graph?
조회 수: 4 (최근 30일)
이전 댓글 표시
This is the code - I am trying to smooth the solved ode number 4 (marked in bold). I am not too sure how to do this? What can I use to do this?
range=[0:86400*10]; % 864000(s)=10days
% Initial conditions of system [Ctmz]
ICs=[0,0,1,0];
% Solve ODEs using ODE45
[tsol,varsol]=ode15s(@ode_sys_2equationsTMZ, range, ICs);
% plot of Concentration of DOX in Blood against time (g/m2/s)
figure(1)
plot(tsol/3600,varsol(:,1))
title('Concentration of TMZ in Blood vs. Time')
xlabel('Time (hr)')
ylabel('Concentration of TMZ in Blood (kg/m^2)')
% plot of Concentration of BV in Blood against time (g)
figure(2)
plot(tsol/3600,varsol(:,2))
title('Concentration of Bevacizumab vs. Time')
ylabel('Concentration of Bevacizumab in Blood (kg)')
xlabel('Time (hr)')
% plot of Anti-Angiogenic Effect
figure(3)
plot(tsol/3600,varsol(:,3))
title('Plot of Anti-Angiogenic Effect vs. Time')
xlabel('Time (hr)')
ylabel('Anti-Angiogenic Effect (%)')
% plot of Concnetration of DOX in Tumour against time
figure(4)
plot(tsol/3600,varsol(:,4))
title('Concentration of TMZ in Tumour vs. Time')
xlabel('Time (hr)')
ylabel('Concentration of TMZ (kg/m^2)')
figure(5)
plot(tsol/3600,varsol(:,1))
hold on
plot(tsol/3600,varsol(:,4))
title('Concentration of TMZ in Blood & Tumour')
xlabel('Time (hr)')
ylabel('Concentration of TMZ (kg/m^2)')
hold off
댓글 수: 0
답변 (1개)
Mathieu NOE
2021년 4월 21일
hello
see below some examples of how to smooth data; plenty of possibilities...
Fs = 1000;
samples = 1000;
dt = 1/Fs;
t = (0:samples-1)*dt;
y = square(2*pi*3*t) + 0.1*randn(size(t));
% %%%%%%%%%%%%%%%%
figure(1)
N = 10;
ys = slidingavg(y, N);
plot(t,y,t,ys);legend('Raw','Smoothed');
title(['Data samples at Fs = ' num2str(round(Fs)) ' Hz / Smoothed with slidingavg' ]);
% %%%%%%%%%%%%%%%%
figure(2)
N = 10;
ys = medfilt1(y, N,'truncate');
plot(t,y,t,ys);legend('Raw','Smoothed');
title(['Data samples at Fs = ' num2str(round(Fs)) ' Hz / Smoothed with medfilt1' ]);
grid on
%%%%%%%%%%%%%%%%
figure(3)
N = 10;
ys = sgolayfilt(y,3,51);
plot(t,y,t,ys);legend('Raw','Smoothed');
title(['Data samples at Fs = ' num2str(round(Fs)) ' Hz / Smoothed with sgolayfilt' ]);
grid on
%%%%%%%%%%%%%%%%
NN = 4;
Wn = 0.1;
[B,A] = butter(NN,Wn);
figure(4)
ys = filtfilt(B,A,y);
plot(t,y,t,ys);legend('Raw','Smoothed');
title(['Data samples at Fs = ' num2str(round(Fs)) ' Hz / Smoothed with butterworth LP' ]);
grid on
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function out = slidingavg(in, N)
% OUTPUT_ARRAY = SLIDINGAVG(INPUT_ARRAY, N)
%
% The function 'slidingavg' implements a one-dimensional filtering, applying a sliding window to a sequence. Such filtering replaces the center value in
% the window with the average value of all the points within the window. When the sliding window is exceeding the lower or upper boundaries of the input
% vector INPUT_ARRAY, the average is computed among the available points. Indicating with nx the length of the the input sequence, we note that for values
% of N larger or equal to 2*(nx - 1), each value of the output data array are identical and equal to mean(in).
%
% * The input argument INPUT_ARRAY is the numerical data array to be processed.
% * The input argument N is the number of neighboring data points to average over for each point of IN.
%
% * The output argument OUTPUT_ARRAY is the output data array.
%
% © 2002 - Michele Giugliano, PhD and Maura Arsiero
% (Bern, Friday July 5th, 2002 - 21:10)
% (http://www.giugliano.info) (bug-reports to michele@giugliano.info)
%
% Two simple examples with second- and third-order filters are
% slidingavg([4 3 5 2 8 9 1],2)
% ans =
% 3.5000 4.0000 3.3333 5.0000 6.3333 6.0000 5.0000
%
% slidingavg([4 3 5 2 8 9 1],3)
% ans =
% 3.5000 4.0000 3.3333 5.0000 6.3333 6.0000 5.0000
%
if (isempty(in)) | (N<=0) % If the input array is empty or N is non-positive,
disp(sprintf('SlidingAvg: (Error) empty input data or N null.')); % an error is reported to the standard output and the
return; % execution of the routine is stopped.
end % if
if (N==1) % If the number of neighbouring points over which the sliding
out = in; % average will be performed is '1', then no average actually occur and
return; % OUTPUT_ARRAY will be the copy of INPUT_ARRAY and the execution of the routine
end % if % is stopped.
nx = length(in); % The length of the input data structure is acquired to later evaluate the 'mean' over the appropriate boundaries.
if (N>=(2*(nx-1))) % If the number of neighbouring points over which the sliding
out = mean(in)*ones(size(in)); % average will be performed is large enough, then the average actually covers all the points
return; % of INPUT_ARRAY, for each index of OUTPUT_ARRAY and some CPU time can be gained by such an approach.
end % if % The execution of the routine is stopped.
out = zeros(size(in)); % In all the other situations, the initialization of the output data structure is performed.
if rem(N,2)~=1 % When N is even, then we proceed in taking the half of it:
m = N/2; % m = N / 2.
else % Otherwise (N >= 3, N odd), N-1 is even ( N-1 >= 2) and we proceed taking the half of it:
m = (N-1)/2; % m = (N-1) / 2.
end % if
for i=1:nx, % For each element (i-th) contained in the input numerical array, a check must be performed:
if ((i-m) < 1) & ((i+m) <= nx) % If not enough points are available on the left of the i-th element..
out(i) = mean(in(1:i+m)); % then we proceed to evaluate the mean from the first element to the (i + m)-th.
elseif ((i-m) >= 1) & ((i+m) <= nx) % If enough points are available on the left and on the right of the i-th element..
out(i) = mean(in(i-m:i+m)); % then we proceed to evaluate the mean on 2*m elements centered on the i-th position.
elseif ((i-m) >= 1) & ((i+m) > nx) % If not enough points are available on the rigth of the i-th element..
out(i) = mean(in(i-m:nx)); % then we proceed to evaluate the mean from the element (i - m)-th to the last one.
elseif ((i-m) < 1) & ((i+m) > nx) % If not enough points are available on the left and on the rigth of the i-th element..
out(i) = mean(in(1:nx)); % then we proceed to evaluate the mean from the first element to the last.
end % if
end % for i
end
댓글 수: 0
참고 항목
카테고리
Help Center 및 File Exchange에서 Smoothing에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!