Plot of Short Term Energy (STE) of an acoustic signal and Number of frames

조회 수: 11 (최근 30일)
Kwaku Owusu
Kwaku Owusu 2020년 11월 4일
답변: Mathieu NOE 2020년 11월 5일
Please, I have a 5 minutes recorded acoustic signal with sampling frequency (fs) of 44100 Hz. I would like to section the signal into a number of frames and determine the STE of the signal in each frames using MATLAB.
And then have a plot of the STE and number of frames. Please, I will be glad to have some help. Thanks in advance.
Kwaku
  댓글 수: 2
Mohamad
Mohamad 2020년 11월 4일
Where is your signal ?
Attach and indicate the sampling frquency .
Kwaku Owusu
Kwaku Owusu 2020년 11월 5일
편집: Kwaku Owusu 2020년 11월 5일
Please Mohamad, I have added an image and sampling frequency. Thank you

댓글을 달려면 로그인하십시오.

답변 (1개)

Mathieu NOE
Mathieu NOE 2020년 11월 5일
hello
see :
and if you find it interesting, below some code for wav file analysis
enjoy !
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% FFT parameters
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
NFFT = 8192; %
NOVERLAP = round(0.75*NFFT);
w = hann(NFFT); % Hanning window / Use the HANN function to get a Hanning window which has the first and last zero-weighted samples.
% spectrogram dB scale
spectrogram_dB_scale = 100; % dB range scale (means , the lowest displayed level is XX dB below the max level)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% options
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% if you are dealing with acoustics, you may wish to have A weighted
% spectrums
% option_w = 0 : linear spectrum (no weighting dB (L) )
% option_w = 1 : A weighted spectrum (dB (A) )
option_w = 0;
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% load signal
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% [signal,Fs]=wavread('myWAVaudiofile.wav'); %(older matlab)
% or
[data,Fs]=audioread('myWAVaudiofile.wav'); %(newer matlab)
channel = 1;
signal = data(:,channel);
samples = length(signal);
dt = 1/Fs;
t = (0:dt:(samples-1)*dt);
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% display 1 : averaged FFT spectrum
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
[sensor_spectrum, freq] = pwelch(signal,w,NOVERLAP,NFFT,Fs);
% convert to dB scale (ref = 1)
sensor_spectrum_dB = 20*log10(sensor_spectrum);
% apply A weigthing if needed
if option_w == 1
pondA_dB = pondA_function(freq);
sensor_spectrum_dB = sensor_spectrum_dB+pondA_dB;
my_ylabel = ('Amplitude (dB (A))');
else
my_ylabel = ('Amplitude (dB (L))');
end
figure(1),semilogx(freq,sensor_spectrum_dB);grid
title(['Averaged FFT Spectrum / Fs = ' num2str(Fs) ' Hz / Delta f = ' num2str(freq(2)-freq(1)) ' Hz ']);
xlabel('Frequency (Hz)');ylabel(my_ylabel);
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% display 2 : time / frequency analysis : spectrogram demo
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
[sg,fsg,tsg] = specgram(signal,NFFT,Fs,w,NOVERLAP);
% FFT normalisation and conversion amplitude from linear to dB (peak)
sg_dBpeak = 20*log10(abs(sg))+20*log10(2/length(fsg)); % NB : X=fft(x.*hanning(N))*4/N; % hanning only
% apply A weigthing if needed
if option_w == 1
pondA_dB = pondA_function(fsg);
sg_dBpeak = sg_dBpeak+(pondA_dB*ones(1,size(sg_dBpeak,2)));
my_title = ('Spectrogram (dB (A))');
else
my_title = ('Spectrogram (dB (L))');
end
% saturation of the dB range :
% saturation_dB = 60; % dB range scale (means , the lowest displayed level is XX dB below the max level)
min_disp_dB = round(max(max(sg_dBpeak))) - spectrogram_dB_scale;
sg_dBpeak(sg_dBpeak<min_disp_dB) = min_disp_dB;
% plots spectrogram
figure(2);
imagesc(tsg,fsg,sg_dBpeak);colormap('jet');
axis('xy');colorbar('vert');grid
title([my_title ' / Fs = ' num2str(Fs) ' Hz / Delta f = ' num2str(fsg(2)-fsg(1)) ' Hz ']);
xlabel('Time (s)');ylabel('Frequency (Hz)');
function pondA_dB = pondA_function(f)
% dB (A) weighting curve
n = ((12200^2*f.^4)./((f.^2+20.6^2).*(f.^2+12200^2).*sqrt(f.^2+107.7^2).*sqrt(f.^2+737.9^2)));
r = ((12200^2*1000.^4)./((1000.^2+20.6^2).*(1000.^2+12200^2).*sqrt(1000.^2+107.7^2).*sqrt(1000.^2+737.9^2))) * ones(size(f));
pondA = n./r;
pondA_dB = 20*log10(pondA(:));
end

카테고리

Help CenterFile Exchange에서 Spectral Measurements에 대해 자세히 알아보기

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by