![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/296443/image.png)
Predictive Control Simulation – Three-Phase Inverter 2 level
조회 수: 13 (최근 30일)
이전 댓글 표시
I have a problem inside matlab function
댓글 수: 0
채택된 답변
Joel Van Sickel
2020년 5월 21일
편집: Joel Van Sickel
2020년 5월 21일
Hello Belal,
there are 2 main problesm I see. First, you were using a 3 level inverter, which requires 12 control signals while you were only generating 6. So the 3 level converter needs to be changed to a 2 level converter (or you need to change how you generate the control signals to provide 12). That will fix your port dimensions error. The next issue is that the you will need to convert your values to boolean so that everything is the same data type going into the mux (see image below). Alternatively, you could have your interpreted Matlab Fcn define it's outputs as booleans, right now they are treated as double.
The 2 level converter is the 'universal bridge' block with IGBT's selected.
Regards,
Joel
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/296443/image.png)
추가 답변 (0개)
커뮤니티
더 많은 답변 보기: Power Electronics Community
참고 항목
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!