필터 지우기
필터 지우기

Index exceeds matrix dimensions.

조회 수: 1 (최근 30일)
Akshay Pratap Singh
Akshay Pratap Singh 2019년 3월 13일
편집: Akshay Pratap Singh 2019년 3월 13일
I wrote a following program. Everything is ok to my knowledge. But it shows the error; "Index exceeds matrix dimensions."
clear all
clc
format longEng
syms x y z kh
a=[4;0.5;70];
% The Newton-Raphson iterations starts here
KH=linspace(0,0.55,12);
h=4;
q=100;
gma=14; nq=2*q/(gma*h);
delta=10;
phi=30;
lam=0.1;
A=lam*nq/(1+nq);
kv=0;
% kh=0;
da1=delta*(pi/180); da2=-delta*(pi/180); pha1=phi*(pi/180); pha2=phi*(pi/180);
dp1=delta*(pi/180); dp2=delta*(pi/180); php1=phi*(pi/180); php2=phi*(pi/180);
psi=atan(kh/(1-kv));
a=pha1+da1;
b=pha1-psi;
c=psi+da1;
alphac=atan((sin(a)*sin(b)+(sin(a)^2+sin(b)^2+sin(a)*cos(a)*sin(b)*cos(b)+A*cos(c)*cos(a)*sin(b))^0.5)/(A*cos(c)+sin(a)*cos(b)));
w=0.5*gma*h^2*(1/tan(alphac));
B=h*((1/tan(alphac))-lam);
ka1=((1+nq)*(1-A*tan(alphac))*(cos(b)-(sin(b)/tan(alphac))))/(cos(psi)*(cos(a)+tan(alphac)*sin(a)));
va2=asin(sin(da2)/sin(pha2))-asin(sin(psi)/sin(pha2))-da2-psi;
ka2=(1/cos(psi))*(cos(da2)*((cos(da2)-sqrt(sin(pha2)^2-sin(da2)^2)))/(cos(psi)+sqrt(sin(pha2)^2-sin(psi)^2)))*exp(-va2*tan(pha2));
vp1=asin(sin(dp1)/sin(php1))+asin(-sin(psi)/sin(php1))+dp1+psi;
kp1=(1/cos(psi))*(cos(dp1)*((cos(dp1)+sqrt(sin(php1)^2-sin(dp1)^2)))/(cos(psi)-sqrt(sin(php1)^2-sin(psi)^2)))*exp(vp1*tan(php1));
vp2=asin(sin(dp2)/sin(php2))+asin(-sin(psi)/sin(php2))+dp2+psi;
kp2=(1/cos(psi))*(cos(dp2)*((cos(dp2)+sqrt(sin(php2)^2-sin(dp2)^2)))/(cos(psi)-sqrt(sin(php2)^2-sin(psi)^2)))*exp(vp2*tan(php2));
% Qa1=q*ka1*(h+x); Qp2=q*kp2*y;
sinda1=sin(da1); sindp1=sin(dp1); sinda2=-sin(da2); sindp2=sin(dp2);
cosda1=cos(da1); cosdp1=cos(dp1); cosda2=cos(da2); cosdp2=cos(dp2);
% pa1=ka1*gma*0.5*(h+x)^2;
pp1=kp1*gma*0.5*(x^2);
pa1=0.5*gma*(1-kv)*ka1*h^2;
pa2=ka2*gma*(x*y+0.5*(y^2)); pp2=kp2*gma*(y*(h+x)+(0.5*(y^2)));
zp1=x/3;
za1=((((w*(1-kv)-pa1*sin(da1))*cos(pha1)*h)/(sin(alphac)*cos(alphac-pha1)))-(q*B*(lam*h+0.5*B)))/(pa1*cos(da1));
zp2=((0.5*(h+x)*(y^2))+((y^3)/3))/(((h+x)*y)+(0.5*(y^2)));
za2=((0.5*x*(y^2))+((y^3)/3))/((x*y)+(0.5*(y^2)));
e2=(pp1*cosdp1)+(pa2*cosda2)-(pa1*cosda1)-(pp2*cosdp2);
e3=(pp1*cosdp1*zp1)+(pp2*cosdp2*zp2)-(pa1*cosda1*za1)-(pa2*cosda2*za2);
g=[e2; e3]
J=jacobian([e2, e3], [x, y]);
A=zeros(2,numel(KH));
for i=1:numel(KH)
del=1;
indx=0;
while del>1e-6
gnum = vpa(subs(g,[x,y,kh],[a(1),a(2),KH(i)]));
Jnum = vpa(subs(J,[x,y,kh],[a(1),a(2),KH(i)]));
delx = -Jnum\gnum;
a = a + delx;
del = max(abs(gnum));
indx = indx + 1;
end
A(:,i)=double(a)
end

채택된 답변

KALYAN ACHARJYA
KALYAN ACHARJYA 2019년 3월 13일
편집: KALYAN ACHARJYA 2019년 3월 13일
Initially a defined as vectors
a=[4;0.5;70]; %where a(1)=4, a(2)=0.5 and a(3)=70
After that a is replaced in line 28, as scalars
a=pha1+da1;
But in line 61 & 62 you acess the a data as array as a(1) and a(2), where no a(2) data is avaliable, as a replaced by
a=pha1+da1;
Thats why it shows error in line 61, next in line 62
gnum=vpa(subs(g,[x,y,kh],[a(1),a(2),KH(i)]));
Jnum=vpa(subs(J,[x,y,kh],[a(1),a(2),KH(i)]));
Command Window
>> a=pha1+da1
a =
698.131700797732e-003
>> a(1)
ans =
698.131700797732e-003
>> a(2)
Index exceeds matrix dimensions.
The problem way out is define this a=[4;0.5;70]; and this a=pha1+da1; in different variable name.
Hope you get the issue.
  댓글 수: 1
Akshay Pratap Singh
Akshay Pratap Singh 2019년 3월 13일
편집: Akshay Pratap Singh 2019년 3월 13일
Thank you Kalyan. It resolved my issue.
Thanks a lot.

댓글을 달려면 로그인하십시오.

추가 답변 (0개)

카테고리

Help CenterFile Exchange에서 Matrix Indexing에 대해 자세히 알아보기

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by