My resonant frequency in simulation is different like resonant frequency calculated by Thompson formula, what is wrong?
조회 수: 1 (최근 30일)
이전 댓글 표시
Hello, I have a question, about paralell resonant circuit, I have to compare impedance characteristics of this circuit:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/171135/image.png)
</matlabcentral/answers/uploaded_files/107966/chko%20paralelna.png> I calculated frequency characteristics by this equation in P1: fr=1/2*pi*sqrt((Lt+Lf)*Cf) I have parallel resonant on frequency 187 Hz (187/50=3,742), impedance on this frequency is 41,3 ohm, like we see in tab, but in simulation in simulink I have only 0,12 ohm, I dont know what is wrong
<<
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/171136/image.png)
>>
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/171137/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/171138/image.png)
댓글 수: 1
David Goodmanson
2018년 3월 10일
Hi Tomas,
I of course don't know if that line is copied verbatim from your code, but if it is, it certainly isn't helping things that you have
fr=1/2*pi*sqrt((Lt+Lf)*Cf)
instead of
fr=1/(2*pi*sqrt((Lt+Lf)*Cf))
답변 (0개)
참고 항목
카테고리
Help Center 및 File Exchange에서 Sources에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!